Related papers: Seepage Analysis and Control of the Sahand Rockfil…
This work presents a polyhedral scaled boundary finite element method (PSBFEM) for three dimensional seepage analysis. We first derive the scaled boundary formulation for 3D seepage problems, and subsequently incorporate Wachspress shape…
Tailings dams impound large amounts of saturated soil which can be highly susceptible to liquefaction. Liquefaction results in a severe loss of strength in the retained soil and potentially failure of the dam. If the dam is breached, a…
In this article we present a goal-oriented adaptive finite element method for a class of subsurface flow problems in porous media, which exhibit seepage faces. We focus on a representative case of the steady state flows governed by a…
This study develops a polygonal cell-based smoothed finite element method (CSFEM) for two-dimensional seepage analyses in porous media, covering steady-state, transient, and free-surface problems. Wachspress interpolation on convex…
Achieving accurate numerical results of hydrodynamic loads based on the potential-flow theory is very challenging for structures with sharp edges, due to the singular behavior of the local-flow velocities. In this paper, we introduce the…
This paper investigates finite-element modeling of a vertically damped free-standing rocking column. The paper first derives the nonlinear equation of motion for the coupled system and then compares the analytical solution with…
This paper presents a hybrid Finite Element Method (FEM) and Material Point Method (MPM) approach for modeling liquefaction-induced tailings dam failures from initiation through runout. We apply this method to simulate the 1978 Mochikoshi…
Modeling flow in geosystems with natural fault is a challenging problem due to low permeability of fault compared to its surrounding porous media. One way to predict the behavior of the flow while taking the effects of fault into account is…
In this paper we develop a simple finite element method for simulation of embedded layers of high permeability in a matrix of lower permeability using a basic model of Darcy flow in embedded cracks. The cracks are allowed to cut through the…
We numerically and experimentally investigate evaporation of a sessile droplet on a heated substrate. We develop a finite element (FE) model in two-dimensional axisymmetric coordinates to solve coupled transport of heat in the droplet and…
Dam breach models are commonly used to predict outflow hydrographs of potentially failing dams and are key ingredients for evaluating flood risk. In this paper a new dam breach modeling framework is introduced that shall improve the…
The increased availability of observation data from engineering systems in operation poses the question of how to incorporate this data into finite element models. To this end, we propose a novel statistical construction of the finite…
We introduce a new paradigm for immersed finite element and isogeometric methods based on interpolating function spaces from an unfitted background mesh into Lagrange finite element spaces defined on a foreground mesh that captures the…
Analytical and semi-analytical models for stream depletion with transient stream stage drawdown induced by groundwater pumping are developed to address a deficiency in existing models, namely, the use of a fixed stream stage condition at…
Surfactants play an important role in various physiological and biomechanical applications. An example is the respiratory system, where pulmonary surfactants facilitate the breathing and reduce the possibility of airway blocking by lowering…
This paper studies a model of two-phase flow with an immersed material viscous interface and a finite element method for numerical solution of the resulting system of PDEs. The interaction between the bulk and surface media is characterized…
Hydrokinetic flapping foil turbines in swing-arm mode have gained considerable interest in recent years because of their enhanced capability to extract power, and improved efficiency compared to foils in simple mode. The performance of foil…
The scaled boundary finite element method (SBFEM) is a semi-analytical computational scheme, which is based on the characteristics of the finite element method (FEM) and combines the advantages of the boundary element method (BEM). This…
Cell blebs are protrusions of the cell membrane and can be instrumental for cell migration. We derive a continuum model for the mechanical and geometrical aspects of the onset of blebbing in terms of a force balance. It is abstract and…
In this article we consider the widely used immersed finite element method (IFEM), in both explicit and implicit form, and its relationship to our more recent one-field fictitious domain method (FDM). We review and extend the formulation of…