Related papers: Low-Loss Higher-Order Cross-Sectional Lam\'e Mode …
We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works…
In this work, we demonstrate a high-performance surface acoustic wave (SAW) delay line based on a Scandium alloyed aluminum nitride (AlScN)-on-sapphire platform operating at 5.9 GHz with an exceptionally high acoustic propagation Q-factor.…
Wireless SAW reflective delay line (R-DL) technology is very powerful to carry out remote measurements of various parameters under harsh environments, while enabling the identification of a given sensor among several of them. However, R-DL…
This letter presents a numerical investigation of acoustic modes propagating in an LiNbO$_3$/sapphire substrate under a periodic Al grating, demonstrating the occurrence of longitudinal leaky SAWs (LLSAWs) with a unique combination of very…
In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped…
In this paper, fundamental shear-horizontal SH0 mode Leaky Surface Acoustic Wave (LSAW) resonators on X-cut lithium niobate leveraging dense and robust electrodes such as gold and tungsten are demonstrated for extreme temperature operation…
Lithium niobate (LNO) is a well established material for surface acoustic wave (SAW) devices including resonators, delay lines and filters. Recently, multi-layer substrates based on LNO thin films have become commercially available. Here,…
This letter presents miniature millimeter wave (mmWave, above 30 GHz) acoustic resonators based on a single-layer thin-film lithium niobate (LN) platform. More specifically, we present high performance third-order antisymmetric (A3) mode…
In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide…
Established techniques for characterizing a layer on a substrate system via surface acoustic wave (SAW) dispersion measurement are often slow due to the need for scanning excitation or detection positions. We present a method for…
Low-phase-noise microwave-frequency integrated oscillators provide compact solutions for various applications in signal processing, communications, and sensing. Surface acoustic waves (SAW), featuring orders-of-magnitude shorter wavelength…
Shear-horizontal surface acoustic wave (SH-SAW) filters have shown strong potential for low-loss, compact, GHz-frequency RF front ends. In this work, we demonstrate a high-performance SH-SAW filter design at 4.35 GHz utilizing 42{\deg}Y-cut…
We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amorphous dielectrics. Considering low-loss Si$_3$N$_4$ waveguides with a standard core cross…
Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device…
In this work, Laterally excited Bulk Acoustic Wave (LBAW) resonators on X-cut Lithium Niobate (LiNbO3) and, for the first time their higher-order overtones (LOBAW) are demonstrated by embedding interdigitated electrodes recessed into the…
Transmission surface acoustic wave (SAW) sensors are widely used in various fields of application. In order to maximize the limit of detection (LOD) of such sensor systems, it is of high importance to understand and to be able to quantify…
Surface acoustic waves (SAWs) convey energy at subwavelength depths along surfaces. Using interdigital transducers (IDTs) and opto-acousto-optic transducers (OAOTs), researchers have harnessed coherent SAWs with nanosecond periods and…
We investigate the dependence of photonic waveguide propagation loss on the thickness of the buried oxide layer in Y-cut lithium niobate on insulator substrate to identify trade-offs between optical losses and electromechanical coupling of…
Thin-film lithium niobate (TFLN) has emerged as a versatile platform for phononic and photonic devices with applications ranging from classical signal processing to quantum technologies. However, acoustic loss fundamentally limits the…
Higher-order quasi-longitudinal (QL) Lamb waves have been reported for sensor application in liquid media at a higher thickness-to-wavelength (h/l) ratio than the fundamental symmetric modes, with the main advantage of having higher…