Related papers: Experimental Study on Boiling of Nanofluids in Cop…
Conventional heat carrier liquids have demonstrated remarkable enhancement in heat and mass transfer when nanoparticles were suspended in them. These liquid-nanoparticle suspensions are now known as Nanofluids. However the relationship…
Nanofluids are suspensions of nanoparticles in a base heat-transfer liquid. They have been widely investigated to boost heat transfer since they were proposed in the 1990's. We present a statistical correlation analysis of experimentally…
The use of CO2 as a natural refrigerant in data center cooling, oil recovery and in CO2 capture and storage which is gaining traction in recent years involves heat transfer between CO2 and the base fluid. A need arises to improve the…
Nanofluids are suspensions of nanoparticles and fibers which have recently attracted much attention due to their superior thermal properties. Here, nanofluids are studied in the sense of nanofins transversally attached to a surface, so that…
We study heat transfer from a heated nanoparticle into surrounding fluid, using molecular dynamics simulations. We show that the fluid next to the nanoparticle can be heated well above its boiling point without a phase change. Under…
We show using molecular dynamics simulation that spatial confinement of water inside carbon nanotubes (CNT) substantially increases its boiling temperature and that a small temperature growth above the boiling point dramatically raises the…
Nanofiber surface coating is a promising method for the enhancement of heat transfer during spray cooling. In the present work, the drop dynamics as well as local and overall heat transfer during single drop impact onto a heated wall…
In this contribution, we study situations in which nanoparticles in a fluid are strongly heated, generating high heat fluxes. This situation is relevant to experiments in which a fluid is locally heated using selective absorption of…
We study the role of surface topology, surface chemistry, and wall superheat temperature on the onset of boiling, bubble nucleation and growth, and the possible formation of an insulating vapour film by means of large-scale MD simulations.…
The thermal performance of high heat flux components in a fusion reactor could be enhanced significantly by the use of nanofluid coolants, suspensions of a liquid with low concentrations of solid nanoparticles. However, before they are…
Liquid coolants containing conductive nanoparticles (nanofluids) have been widely studied over the past 30 years but have seen limited adoption in real-world cooling applications. The ability of passive nanoparticles to enhance heat…
Boiling is the out-of-equilibrium transition which occurs when a liquid is heated above its vaporization temperature. At the nanoscale, boiling may be triggered by irradiated nanoparticles immersed in water or nanocomposite surfaces and…
The main objective of the present study is to investigate the effect of adding nanoparticles at different concentrations and sizes to boiling distilled water on the nucleate pool boiling heat transfer performance. The major studied…
Fully atomistic molecular dynamics simulations were carried out to investigate how a liquid-like water droplet behaves when into contact with a nanopore formed by carbon nanotube arrays. We have considered different tube arrays, varying the…
Capillary forces guide the motion of biomolecular condensates, water-borne insects, and breakfast cereal. These surface-mediated interactions can be harnessed to build units into materials with exotic properties deriving from mesoscale…
Water inside a nanocapillary becomes ordered, resulting in unconventional behavior. A profound enhancement of water flow inside nanometer thin capillaries made of graphene has been observed [B. Radha et.al., Nature (London) 538, 222…
This research paper is intended to study the nanoparticles shapes on peristalsis of Casson fluid in a channel flow by considering Joule heating effects. The study of such flows has various relevance applications in biomedical engineering…
We investigate the interplay of thermophoretic force and interfacial tension on the capillary filling dynamics of a Newtonian nanofluid in a microchannel. In our model, we also consider an intricate thermofluidic coupling by taking the…
Nanoparticle-Enhanced Phase Change Materials (NePCM) have been a subject of intensive research owing to their potential for enhanced thermo-physical properties. However, their behavior during phase change processes, such as melting or…
Hypothesis: Sample-spanning particle networks are used to induce structure and a yield stress, necessary for 3D printing of porous ceramics and paints. In capillary suspensions, a small quantity of immiscible secondary fluid is incorporated…