Related papers: Optomechanical sensor network with fiber Bragg gra…
The integration of photonic sensors into microfluidic devices provides opportunities for dynamic measurement of chemical and physical properties of fluids in very small volumes. We previously reported on the use of commercially available…
Interferometric interrogation technique realized for conventional fiber Bragg grating (FBG) sensors is historically known to offer the highest sensitivity measurements, however, it has not been yet explored for {\pi}-phase-shifted FBG…
Nanophotonic optomechanical devices allow observation of nanoscale vibrations with sensitivity that has dramatically advanced metrology of nanomechanical structures [1-9] and has the potential to impact studies of nanoscale physical systems…
The combination of low mass density, high frequency, and high quality-factor of mechanical resonators made of two-dimensional crystals such as graphene make them attractive for applications in force sensing/mass sensing, and exploring the…
A fully on-fiber optomechanical cavity is fabricated by patterning a suspended metallic mirror on the tip of an optical fiber. Optically induced self-excited oscillations of the suspended mirror are experimentally demonstrated. We discuss…
Optical magnetometers are currently able to achieve magnetometric sensitivities below 1 fT/Hz^1/2. Although such sensitivities are typically obtained for ultra-low-field measurements, a group of optical magnetometers allows the detection of…
Optomechanics allows the transduction of weak forces to optical fields, with many efforts approaching the standard quantum limit. We consider force-sensing using a mirror-in-the-middle setup and use two coupled cavity modes originated from…
Precision optical filters are key components for current and future photonic technologies. Here, we demonstrate a low loss spectral filter consisting of an ultrasteep bandpass feature with a maximum gradient of (90.6$\pm$0.7) dB/GHz,…
Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain…
We here report magnetostriction measurements under pulsed megagauss fields using a high-speed 100 MHz strain monitoring system devised using fiber Bragg grating (FBG) technique with optical filter method. The optical filter method is a…
Optomechanical systems have been exploited in ultrasensitive measurements of force, acceleration, and magnetic fields. The fundamental limits for optomechanical sensing have been extensively studied and now well understood -- the intrinsic…
We study the fundamental sensitivity that can be achieved with an ideal optomechanical system in the nonlinear regime for measurements of time-dependent gravitational fields. Using recently developed methods to solve the dynamics of a…
The nature of dark matter is one of the most important open questions in modern physics. The search for dark matter is challenging since, besides gravitational interaction, it feebly interacts with ordinary matter. Mechanical sensors are…
Optomechanical systems combine extreme sensitivity and bandwidth in the control of mechanical motion, of interest for various applications. Integrated on a chip, actuated and detected all-optically by a single laser, they could disrupt…
Cavity optomechanical systems can be used for sensitive detection of mechanical motion and to control mechanical resonators, down to the quantum level. The strength with which optical and mechanical degrees of freedom interact is defined by…
Parametric coupling of optical and mechanical degrees of freedom forms the basis of many ultra-sensitive measurements of both force and mechanical displacement. An optical cavity with a mechanically compliant boundary enhances the…
Monitoring the optical phase change in a fiber enables a wide range of applications where fast phase variations are induced by acoustic signals or vibrations in general. However, the quality of the estimated fiber response strongly depends…
Purpose: Endovascular aortic repair procedures are currently conducted with 2D fluoroscopy imaging. Tracking systems based on fiber Bragg gratings are an emerging technology for the navigation of minimal-invasive instruments which can…
In a canonical optomechanical system, mechanical vibrations are dynamically encoded on an optical probe field which reciprocally exerts a backaction force. Due to the weak single photon coupling strength achieved with macroscopic…
We show that the use of Random Optical Grating using UV Exposure (ROGUE) can significantly reduce the noise floor of an optical frequency domain reflectometry (OFDR) measurement of Faraday rotation in the polarization. We compare it with…