Related papers: Nanostructured S@VACNTs Cathode with Lithium Sulfa…
Cycling efficiency and rate capability of porous copper-coated, amorphous silicon thin-film negative electrodes are compared to equivalent silicon thin-film electrodes in lithium-ion batteries. The presence of a copper layer coated on the…
The solid-state electrolyte is critical for achieving next-generation high energy density and high-safety batteries. Solid polymer electrolytes (SPEs) possess great potential for commercial application owing to their compatibility with the…
Lithium-sulfur batteries (LSBs) represent one of the most promising next-generation energy storage technologies, offering exceptionally high energy densities. However, their widespread adoption remains hindered by challenges such as…
Silicon (Si) anodes attract a lot of research attention for their potential to enable high energy density lithium-ion batteries (LIBs). Many studies focus on nanostructured Si anodes to counteract deterioration. In this work, we model LIBs…
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes…
Highly conductive solid electrolytes are one key component for the development of safe and high-power all-solid-state batteries. Enormous progress has been achieved in the field of lithium solid electrolytes. Meanwhile, their ion…
We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to direct grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature ($<…
Silicon is a promising candidate for negative electrodes due to its high theoretical specific capacity (~3579 mAh g-1) and low lithiation potential (~0.40 V vs Li). However, its practical applications in battery have been inhibited by the…
A 3D mechanical stable scaffold is shown to accommodate the volume change of a high specific capacity nickel-tin nanocomposite Li-ion battery anode. When the nickel-tin anode is formed on an electrochemically inactive conductive scaffold…
Sulfide chalcopyrite, Cu(In,Ga)S2, having wide bandgap (larger than 1.5 eV), favorable optoelectronic properties, and high stability, is a promising top-cell absorber for tandem applications. Adapting device structures optimized for 1.0 -…
Single-walled carbon nanotube encapsulated in boron nitrite nanotube (SWCNT@BNNT) is a novel nanomaterial with a one-dimensional van der Waals (1D-vdW) heterostructure. In this paper, we demonstrated that the SWCNT@BNNT has an enhanced…
Natural abundance of sodium and its similar behavior to lithium triggered recent extensive studies of cost-effective sodium-ion batteries (SIBs) for large-scale energy storage systems. A challenge is to develop electrode materials with a…
Fabrics of continuous fibers of carbon nanotubes (CNTFs) are attractive materials for multifunctional energy storage devices, either as current collector, or as active material. Despite a similar chemical composition,…
The Langmuir-Blodgett (LB) technique is a powerful, widely used method for preparing coatings of amphiphilic molecules at air/water interfaces with thickness control down to a single molecule. Here we report two new LB techniques designed…
Novel compound comprising of Li2FexMn(1-x)SiO4/MWCNT were prepared by using Sol-Gel technique. In this study, improved electrochemical properties are observed by substituting Fe to replace Mn. and further multiwalled carbon nano tubes are…
This manuscript explores recent advancements in solid-state sodium-based battery technology, particularly focusing on electrochemical performance and the challenges associated with developing efficient solid electrolytes. The replacement of…
Varying the amounts of silicon and carbon, different composites have been prepared by ball milling of Si, Ni$_{3.4}$Sn$_4$, Al and C. Silicon and carbon contents are varied from 10 to 30 wt.% Si, and 0 to 20 wt.% C. The microstructural and…
A new superstructure of layered pristine LiNiO2 (LNO) was obtained optimizing a large supercell of the 166 space group, the one observed experimentally by XRD, and relaxing both cell parameters and internal positions. The crystal structure…
High-performance solution-processed short-channel carbon nanotube (CNT) thin film transistors (TFTs) are fabricated using densely aligned arrays of metallic CNTs (m-CNTs) as source and drain electrodes, and aligned arrays of semiconducting…
The discovery of transparent electrodes led to the development of optoelectronic devices such as OLEDs, LCDs, touchscreens, IR sensors, etc. Since ITO has many drawbacks in respect of its production cost and limited transparency in IR,…