Related papers: Infrared thermal imaging camera to measure low tem…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…
Multispectral mid-infrared (2-5 ${{\mu}m}$) imaging is a critical capability across science and technology, offering a window into the vibrational and thermal landscape of matter that is inaccessible to visible sensors. It bridges the…
In this laboratory-based study, a plate was designed, manufactured and then characterised thermally and dimensionally using a thermal imager. This plate comprised a range of known scratch, dent, thinning and pitting artefacts as mimics of…
Plasmon lasers create and sustain intense and coherent optical fields below light's diffraction limit with the unique ability to drastically enhance light-matter interactions bringing fundamentally new capabilities to bio-sensing, data…
Time-series photometry taken from ground-based facilities is improved with the use of comparison stars due to the short timescales of atmospheric-induced variability. However, the sky is bright in the thermal infrared (3-5 um), and the…
We consider a two-color formaldehyde PLIF thermometry scheme using a wavelength-switching injection seeding Nd:YAG laser at 355 nm. The 28183.5 cm-1 and 28184.5 cm-1 peaks of formaldehyde are used to measure low temperature combustion zone.…
Micro- and nanothermometry enable precise temperature monitoring and control at the micro- and nanoscale, and have become essential diagnostic tools in applications ranging from high-power microelectronics to biosensing and nanomedicine.…
This paper deals with an analytical modeling of heat transfers simulating a new radiation calorimeter operating in a temperature range from -50 {\deg}C to 150 {\deg}C. The aim of this modeling is the evaluation of the feasibility and…
We describe a simple and robust method using an internal reflection element acting as an infrared waveguide to measure the spectra of near-field thermal emission. We experimentally demonstrate the spectrally-narrow peaks of near-field…
High-speed thermal imaging in the long-wave infrared (LWIR) is critical for applications from autonomous navigation to medical screening, yet existing uncooled detectors are fundamentally constrained. Resistive bolometers are limited by…
We present a novel single-shot interferometric ToF camera targeted for precise 3D measurements of dynamic objects. The camera concept is based on Synthetic Wavelength Interferometry, a technique that allows retrieval of depth maps of…
The resolution of optical imaging is limited by diffraction as well as detector noise. However, thermal imaging exhibits an additional unique phenomenon of ghosting which results in blurry and low-texture images. Here, we provide a detailed…
IR cameras are widely used for temperature measurements in various applications, including agriculture, medicine, and security. Low-cost IR cameras have the immense potential to replace expensive radiometric cameras in these applications;…
State estimation in complex illumination environments based on conventional visual-inertial odometry is a challenging task due to the severe visual degradation of the visual camera. The thermal infrared camera is capable of all-day time and…
Long Wave Infrared (LWIR) cameras provide images regardles of the ambient illumination, they tolerate fog and are not blinded by the incoming car headlights. These features make LWIR cameras attractive for autonomous navigation, security…
In recent years there has been considerable interest in exploiting the temperature dependence of sapphire whispering gallery mode frequency to develop a mechanically stable, high accuracy temperature sensor. Disk-resonator-based devices…
In this article, a general model for 1D thermal wave interference is derived for multi-layered coating systems on a thermally thick substrate using the same principles as for the well established one-layered and two-layered coating cases.…
Cooling down test masses to cryogenic temperatures is a way to reduce the thermal noise of gravitational wave detectors. Crystalline materials are considered the most promising materials for fabricating cryogenic test masses and their…
The Ohara glass S-FTM16 is of considerable interest for near-infrared optical designs because it transmits well through the K band and because negative S-FTM16 elements can be used to accurately achromatize positive calcium fluoride…
Resistance thermometry provides a time-tested method for taking temperature measurements that has been painstakingly developed over the last century. However, fundamental limits to resistance-based approaches along with a desire to reduce…