Related papers: Doping-free Janus homojunction solar cell with eff…
Conventional models of planar and bulk heterojunction organic solar cells have been extended by introducing doping in the active layer. We have studied the performance of organic solar cells as a function of dopant concentration. For bulk…
Highly efficient, environmental friendly and renewable sources of energy are of great need today to combat with increasing energy demands and environmental pollution. In this work, we have investigated the novel 2D allotropes i.e.,…
In this study, we designed and optimized the performance of pin junction GaAs/AlGaAs heterojunction nanowire solar cell arrays. It is done by performing coupled optoelectronic simulations to find the optimal doping for the GaAs core and…
Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high…
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type doping in the emitter…
Tellurium allows attaining heavy n-type doping levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice…
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different…
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline…
In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement…
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The doping densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12}…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
Substitutional doping with transition metals is carried out in the Lepidocrocite phase - the stable monolayer geometry of TiO$_2$, using density functional theory (DFT) methods. The doping is carried out at the differently coordinated O…
The photovoltaic effect is one of the fundamental light-matter interactions in light energy harvesting. In conventional photovoltaic solar cells, the photogenerated charge carriers are extracted by the built-in electric field of a PN…
One effective way to prevent toxicity and improve the stability of materials for photovoltaic applications is to exclude lead and organic molecules from perovskite materials. Specifically, the CsSn1-xGexI3 appears to be a promising…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
A high photon to electricity conversion efficiency of 47.2082% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a quadruple junction solar cell design. The electronic bandgap of…
Most traditional semiconductor materials are based on the control of doping densities to create junctions and thereby functional and efficient electronic and optoelectronic devices. The technology development for halide perovskites had…
The performances of various configurations of InGaN solar cells are compared using nextnano software. Here we compare a flat base graded wall GaN/InGaN structure, with an InxGa1-xN well with sharp GaN contact layers, and an InxGa1-xN…
Recently, much effort has been devoted to improve the efficiency of organic photovoltaic solar cells based on blends of donors and acceptors molecules in bulk heterojunction architecture. One of the major losses in organic photovoltaic…
New generation Indium based lead-free Cs2InAgCl6 is a promising halide material in photovoltaic applications due to its good air stability and non-toxic behavior. But its wide band gap (>3 eV) is not suitable for solar spectrum and hence…