Related papers: In-line fiber optic optofluidic sensor based on a …
The optical fiber Fabry-Perot interferometer (FPI) has been widely investigated as a potential temperature sensor. To function as a temperature sensor, the cavity of the FPI is typically constructed from either silica fibers or polymers.…
We present the ongoing development of a commercially available Micron Optics fiber-Fabry Perot Interferometer as a precise, stable, easy to use, and economic spectrograph reference with the goal of achieving <1 m/s long term stability.…
Fabry-Perot interferometers have stimulated numerous scientific and technical applications ranging from high resolution spectroscopy over metrology, optical filters to interfaces of light and matter at the quantum limit and more. End facet…
We present the novel design of microfabricated, silicon-substrate based mirrors for use in cryogenic Fabry-Perot Interferometers (FPIs) for the mid-IR to sub-mm/mm wavelength regime. One side of the silicon substrate will have a…
Ultrahigh-resolution fiber-optic sensing has been demonstrated with a meter-long, high-finesse fiber Fabry-Perot interferometer (FFPI). The main technical challenge of large, environment-induced resonance frequency drift is addressed by…
We report on the development of a refractive index sensor obtained by using a singlemode-multimode-singlemode (SMS) structure and a Fabry-Perot interferometer (FPI) set into an in-series configuration. Due to the self-imaging phenomenon,…
A fabrication method for electronic quantum Hall Fabry-Perot interferometers (FPI) is presented. Our method uses a combination of e-beam lithography and low-damage dry-etching to produce the FPIs and minimize the excitation of charged traps…
This work demonstrates the potential of fiber optic sensors for measuring thermal effects in lithium-ion batteries, using a fiber optic measurement method of Optical Frequency Domain Reflectometry (OFDR). The innovative application of fiber…
Brillouin microscopy is an emerging optical technique for probing mechanical properties with submicron resolution, offering fully non-contact, label-free operation. Despite its unique capabilities, broader adoption has been limited by slow…
Optical spectroscopic sensors are powerful tools for analysing gas mixtures in industrial and scientific applications. Whilst highly sensitive spectrometers tend to have a large footprint, miniaturized optical devices usually lack…
Resolution investigation of multiplexed displacement sensors based on extrinsic fiber Fabry-Perot interferometers (EFPI) was carried out. The cases of serial and parallel configurations were considered, the analysis of the problems and the…
(Abridged): We define and test a new technique to accurately measure the cavity defects of air-spaced FPIs, including distortions due to the spectral tuning process typical of astronomical observations. We further develop a correction…
To understand the behaviour of rocks under changing load or temperature conditions, the determination of physical parameters like pore pressure or temperature within the pore space is essential. Within this study, the implementation of a…
In this paper, a novel coarse-to-fine optical MEMS accelerometer based on the Fabry Perot (FP) interferometer is proposed. The mechanical structure consists of a proof mass that is suspended by four L-shaped springs. The deflection of the…
The South Pole Imaging Fabry-Perot Interferometer (SPIFI) is the first instrument of its kind -- a direct-detection imaging spectrometer for astronomy in the submillimeter band. SPIFI's focal plane is a square array of 25 silicon bolometers…
Experiments were performed with Fabry-Perot optical resonators in vacuum at low temperatures. Mirrors were applied on substrates of various optical materials. The infrared laser with a wavelength of 1.064 microns was used. The pump power at…
We report the development of a fiber-based, tunable optical cavity with open access. The cavity is of the Fabry-Perot type and is formed with miniature spherical mirrors positioned on the end of single- or multi-mode optical fibers by a…
In this paper, we report on a multicore fiber-based (MCF) temperature sensor that operates in a wide thermal range and that is robustly packaged to withstand harsh environments. To develop the sensor, the fundamentals concerning the effect…
Fabry-Perot interferometers have advantages over slit spectrographs because they allow fast narrow-band imaging and post-factum image reconstruction of spectropolarimetric data. Temperature, plasma velocity, and magnetic field maps can be…
We propose a dual cavity Fabry-Perot interferometer as a wavelength calibrator and a stability tracking device for astronomical spectrograph. The FPI consists of two adjoining cavities engraved on a low expansion monoblock spacer. A…