Related papers: High-speed ditching of double curvature specimens …
Air cavities, i.e. air layers developed behind cavitators, are seen as a promising drag reducing method in the maritime industry. Here we utilize the Taylor-Couette (TC) geometry, i.e. the flow between two concentric, independently rotating…
We experimentally study the airflow in a collapsing cavity created by the impact of a circular disk on a water surface. We measure the air velocity in the collapsing neck in two ways: Directly, by means of employing particle image…
The effect of flexibility on the hydrodynamic loads and on the flow structures generated on a rectangular foil when oscillating in pitch has been studied. Hydrodynamic loads were measured with a 6-axes balance, and the flow structures were…
The directional movement and rebound behaviours of two droplets simultaneously impacting a designed flat surface with wettability difference is investigated based on the three-dimensional multi-relaxation-time pseudopotential lattice…
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For…
We present laboratory experiments of surface wave turbulence excited by paddles in the deep water regime. The free surface is seeded with buoyant particles that are advected and dispersed by the flow. Positions and velocities of the…
The influence that the kinematics of pitching and heaving 2D airfoils have on the aerodynamic forces is investigated using Direct Numerical Simulations and a force decomposition algorithm. Large amplitude motions are considered (of the…
We present simulations of granular flows in a modified Couette cell, using a continuum model recently proposed for dense granular flows. Based on a friction coefficient, which depends on an inertial number, the model captures the positions…
This study has numerically investigated the effect of surface wettability on two-phase immiscible flow and dynamics of droplet pinch-off in a T-junction microchannel using finite element method. A conservative level set method (CLSM) has…
Boats float supported only by buoyancy at rest and at very low speeds. As the speed increases, a hull capable of planing makes a sharp transition to a lifting surface while plowing up the bow wave. As the speed increases further the boat…
This study examines whether the dispersion of passive particles at the free surface of a generic (nonturbulent) shallow flow can reliably represent the behavior of depth-keeping particles below the surface. A shallow configuration…
The main focus of marine oil spill modelling is often on where the oil will end up, i.e., on the horizontal transport. However, due to current shear, wind drag, and the different physical, chemical and biological processes that affect oil…
A pair of Direct Numerical Simulations is used to investigate curvature and pressure effects. One has a Gaussian test bump and a straight opposite wall, while the other has a straight test wall and a blowing/suction distribution on an…
We use a three-bead-spring model to investigate the dynamics of bi-flagellate micro-swimmers near a surface. While the primary dynamics and scattering are governed by geometric-dependent direct contact, the fluid flows generated by the…
Inviscid computations are presented of a self-propelled virtual body connected to a combined heaving and pitching foil that uses continuous and intermittent motions. It is determined that intermittent swimming can improve efficiency when…
We consider the impact of surface hydrodynamics on the interplay between curvature and composition in coarsening processes on model systems for biomembranes. This includes scaling laws and equilibrium configurations, which are investigated…
The dynamics of entrainment of finite-size heavy particles in a turbulent open channel flow over a smooth surface are analyzed. Three types of simulations, namely with freely moving, rotation-constrained, and spanwise-motion-constrained…
We report the first high-order eddy-resolving simulation of flow over a marine propeller using a recently developed high-order sliding-mesh method. This method employs the flux reconstruction framework and a new dynamic curved mortar…
Cavitation in tubes is a common occurrence in nature and engineering applications. Previous studies of cavitation bubble dynamics mainly consider bubbles in stagnant-water tubes, but the dynamics of cavitation bubbles in tubes with flow is…
This review article presents a summary of the main categories of models developed for modeling cavitation, a multiphase phenomenon in which a fluid locally experiences phase change due to a drop in ambient pressure. The most common…