Related papers: Double-side Integration of the Fluorinated Self-As…
The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in…
Self-assembled monolayers (SAMs) have revolutionized the fabrication of lead-based perovskite solar cells, but they remain underexplored in tin perovskite systems. PEDOT is the material of choice for hole-selective layers in tin perovskite…
[4-(3,6-dimethyl-9H-carbazole-9-yl)butyl]phosphonic acid (Me-4PACz) self-assembled monolayer (SAM) has been employed in perovskite single junction and tandem devices demonstrating high efficiencies. However, a uniform perovskite layer does…
Metal halide perovskite solar cells (MHPSCs) hold great promise related to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains a major challenge. In this study, we…
The significant surge in energy use and escalating environmental concerns have sparked worldwide interest towards the study and implementation of solar cell technology. Perovskite solar cells (PSCs) have garnered remarkable attention as an…
Tandem perovskite solar cells beckon as lower cost alternatives to conventional single junction solar cells, with all-perovskite tandem photovoltaic architectures showing power conversion efficiencies up to 26.4%. Solution-processing…
Perovskite solar cells (PSCs) are the fastest-growing photovoltaic (PV) technology in the solar cell community and have reached an efficiency close to that of commercial silicon (Si) solar cells. The organic-inorganic halide perovskite…
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 %…
The transition to sustainable energy has accelerated research into perovskite solar cells (PSCs) as promising candidates for next-generation photovoltaics. Despite their remarkable efficiencies, the commercialization of PSCs is hindered by…
Despite the promising optoelectronic properties of methylammonium lead iodide (MAPbI3)-based perovskite solar cells (PSCs), their commercial viability is hindered by interfacial energy misalignment, suboptimal light absorption, and thermal…
Perovskite solar cells (PSCs) with superior performance have been recognized as a potential candidate in photovoltaic technologies. However, the defects in active perovskite layer induce non-radiative recombination which restricts the…
Interfacial engineering has fueled recent development of p-i-n perovskite solar cells (PSCs), with self-assembled monolayer-based hole-transport layers (SAM-HTLs) enabling almost lossless contacts for solution-processed PSCs, resulting in…
Interfaces between the perovskite active layer and the charge-transport layers (CTLs) play a critical role in both efficiency and stability of halide-perovskite photovoltaics. One of the major concerns is that surface defects of perovskite…
In the past few years, the meteoric development of hybrid organic--inorganic perovskite solar cells (PSC) astonished the community. The efficiency has already reached the level needed for commercialization; however, the instability hinders…
The widespread use of lead-based materials in tandem solar cells raises critical environmental and health concerns due to their inherent toxicity and risk of contamination. To address this challenge, we focused on lead-free tandem…
Hybrid organic-inorganic halide perovskites are low-cost solution-processable solar cell materials with photovoltaic properties that rival those of crystalline silicon. The perovskite films are typically sandwiched between thin layers of…
Perovskite solar cells employing self assembled monolayers such as Me-4PACz as hole transport layer has been reported to demonstrate high device efficiency. However, the poor perovskite wetting on the Me-4PACz caused by poor perovskite ink…
A novel triphenylamine-based hole transport material (HTM) with a carboxyl anchoring group (TPATC) was developed for tuning the interface between nanocrystalline NiO and double cation CsCH3(NH2)2PbI3-xClx absorber in p-i-n device…
Perovskite-organic tandem solar cells (P-O TSCs) hold great promise for next-generation thin-film photovoltaics, with steadily improving power conversion efficiency (PCE). However, the development of optimal interconnecting layers (ICLs)…
In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large…