Related papers: Robust High-frequency Laser Phase Noise Suppressio…
Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit fidelity of operation. Here, we…
Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large "servo bumps" that can have deleterious effects…
We demonstrate a fiber Fabry-Perot (FFP) sensor capable of detecting sub-picostrain signals, from 100 Hz and extending beyond 100 kHz, using the Pound-Drever-Hall frequency locking technique. A low power diode laser at 1550 nm is locked to…
We present a novel and simple method of stabilizing the laser phase and frequency by polarization spectroscopy of an atomic vapor. In analogy to the Pound-Drever-Hall method, which uses a cavity as a memory of the laser phase, this method…
We report the frequency stabilization of an erbium-doped fiber distributed-feedback laser using an all-fiber based Michelson interferometer of large arm imbalance. The interferometer uses a 1 km SMF-28 optical fiber spool and an acousto…
Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators…
We demonstrate an injection-seeded thin-disk Yb:YAG laser at 1030 nm, stabilized by the Pound-Drever-Hall (PDH) method. We modified the PDH scheme to obtain an error signal free from Trojan locking points, which allowed robust re-locking of…
Residual amplitude modulation (RAM) effect in a Pound-Drever-Hall (PDH) technique locked cavity system is analysed in this paper. Frequency shift caused by RAM in PDH is found to be both related to the amplitude of the RAM and to the…
We demonstrate a combination of optical and electronic feedback that significantly narrows the linewidth of distributed Bragg reflector lasers (DBRs). We use optical feedback from a long external fiber path to reduce the high-frequency…
The tunability of an optical cavity is an essential requirement for many areas of research. Here, we use the Pound-Drever-Hall technique to lock a laser to a whispering gallery mode (WGM) of a microbubble resonator, to show that linear…
We present a simple method to stabilize the optical path length of an optical fiber to an accuracy of about 1/100 of the laser wavelength. We study the dynamic response of the path length to modulation of an electrically conductive heater…
A major limitation of laser interferometers using continuous wave lasers are parasitic light fields, such as ghost beams, scattered or stray light, which can cause non-linear noise. This is especially relevant for laser interferometric…
We report a laser noise reduction method by locking it to an actively stabilized fiber-based Mach Zehnder interferometer with 10 km optical fiber to achieve large arm imbalance. An acousto optic modulator is used for interferometer…
Diffusion posterior sampling solves inverse problems by combining a pretrained diffusion prior with measurement-consistency guidance, but it often fails to recover fine details because measurement terms are applied in a manner that is…
We present an inexpensive, low-noise ($<260~\mu$V$_{rms}$, 0.1~Hz - 100~kHz) design for a piezo driver suitable for frequency tuning of external-cavity diode lasers. This simple driver improves upon many commercially available drivers by…
We report a simple technique to suppress high frequency phase noise of a Yb-based fiber optical frequency comb using an active intensity noise servo. Out-of-loop measurements of the phase noise using an optical heterodyne beat with a…
We have demonstrated broadband frequency-noise suppression in a laser stabilization system by augmenting a conventional proportional-integral-derivative (PID) controller with a digital disturbance observer (DOB) implemented on a…
Lasers that combine narrow linewidths with rapid tunability are critical for applications such as coherent optical ranging, distributed fiber-optic sensing, and precision spectroscopy. Despite significant progress in integrated laser…
An essential metric to quantify the stability of a laser is its frequency noise (FN). This metric yields information on the linewidth and on noise components which limit its usage for high precision purposes such as coherent communication.…
Phase noise can be modulated onto the output of a laser with an electro-optic phase modulator (EOM) to create a highly incoherent broadened source with low intensity noise. This technique leaves a small but finite fraction of the coherent…