Related papers: MX precipitate behavior in an irradiated advanced …
Reduced activation ferritic/martensitic (RAFM) steels are the leading candidate structural materials for first-wall and blanket components in fusion reactors. This work is the first in a series to provide a systematic roadmap of MX…
The Fe-Cu system has attracted much attention over the last several decades due to its technological importance as a model alloy for Cu steels. In spite of these efforts several aspects of its phase diagram remain unexplained. Here we use…
VN precipitates used to strengthen ARAFM steels for fusion applications dissolve under high Fe ion irradiation (100 dpa at 10^-3 dpa s^-1, 600 C). This study examined point defects and solute substitutions using atom probe tomography,…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
Due to their high strength and advantageous high-temperature properties, tungsten-based alloys are being considered as plasma-facing candidate materials in fusion devices. Under neutron irradiation, rhenium, which is produced by nuclear…
Iron based industrial steels typically contain a large number of alloying elements, even so-called low alloyed steels. Under irradiation, these alloying elements form clusters that have a detrimental impact of the mechanical properties of…
Effective post-heat treatment is critical to achieve desired microstructure for high-performance in additively manufactured (AM) components. In this work, the influence of homogenization on microstructure-property relationship in 17-4PH…
Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. Bombardment with energetic fusion neutrons causes collision cascade damage and defect formation. Interaction of defects with helium,…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
Combined effect of Carbon and Nitrogen levels and isothermal holding temperature on the microstructure, precipitation and the tensile properties of Vanadium microalloyed steels with 0.05 weight percent Vanadium were studied. Two different…
Evolutionary searches were employed to predict the most stable structures of perovskites with helium atoms on their A-sites up to pressures of 10 GPa. The thermodynamics associated with helium intercalation into [CaZr]F6, structure that…
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of…
Understanding whether Helium can sediment to the core of galaxy clusters is important for a number of problems in cosmology and astrophysics. All current models addressing this question are one-dimensional and do not account for the fact…
Zirconium alloys are used as nuclear fuel cladding material due to their mechanical and corrosion resistant properties together with their favorable cross-section for neutron scattering. At running conditions, however, there will be an…
Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget. Transmission electron…
Additively manufactured (AM) aluminum alloys with high strength and thermal stability have broad applications in turbine engines, vacuum pumps, heat exchangers, and many other industrial systems. Employing precipitates with an L1$_2$…
Precipitation strengthening is a key strengthening method for metallic materials. However, the temperature effect on precipitation strengthening is still unclear to date. Based on dislocation theory, a thermally-activated precipitation…
We characterise the influence of the segregation behaviours of two typical alloying elements, aluminium and nickel, on the interfacial cohesive properties of copper-rich precipitates in ferritic steels, with a view towards understanding…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…