Related papers: Next Generation LLRF Control Platform for Compact …
The ISIS synchrotron at the Rutherford Appleton Laboratory in the UK now routinely uses a dual harmonic RF system to accelerate beam currents in excess of 230uA to run two target stations simultaneously. The acceleration in the ISIS…
Multiple-input, multiple-output (MIMO) technology provides high data rate and enhanced QoS for wireless com- munications. Since the benefits from MIMO result in a heavy computational load in detectors, the design of low-complexity…
The CLIC (Compact Linear Collider) RF power source is based on a new scheme of electron pulse compression and bunch frequency multiplication using injection by transverse RF deflectors into an isochronous ring. In this paper, we describe…
The China initiative Accelerator Driven System, CiADS, physics design adopts $162.5 \,\mathrm{MHz}$, $325 \,\mathrm{MHz}$, and $650 \,\mathrm{MHz}$ cavities, which are driven by the corresponding radio frequency (RF) power system, requiring…
The commissioning of two cryomodule components is underway at Fermilab's Superconducting Radio Frequency (SRF) Accelerator Test Facility. The research at this facility supports the next generation high intensity linear accelerators such as…
Superconducting cavities (SRF) are widely used in new generation particle accelerators, increasing the requirements and specifications for new designs. The LLRF control system, including the detuning control due to mechanical perturbations,…
At the Ibaraki Neutron Medical Research Center, an accelerator-based neutron source for iBNCT (Ibaraki - Boron Neutron Capture Therapy) is being developed using an 8-MeV proton linac and a beryllium-based neutron production target. The…
Pulsed microwave stability in linear accelerators (LINACs) is critical for maintaining high-quality electron beams in synchrotron radiation and free-electron laser (FEL) facilities. This study establishes and validates a zero-crossing…
The development of Ultra-High Frequency (UHF) linear accelerators via Metal Additive Manufacturing (MAM) is a strategic research focus of the RACERS team at GSI. The 704.4 MHz Crossbar H-mode (CH) cavity, proposed in 2021 to facilitate…
We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID…
Transverse Deflecting Cavities (TDCs) are generally adopted for electron beam diagnosis. Three sets of S-band and two sets of X-band TDCs are planned at Shenzhen Superconducting Soft X-ray Free Electron Laser (S3FEL) to accurately measure…
Waveform feature is one of the requirements for the FRIB LLRF controllers. It is desired that the LLRF con-trollers store the internal data (e.g. the amplitude and phase information of forward/reverse/cavity signals) for at least one second…
This paper presents RF-Transformer, a unified backscatter radio hardware abstraction that allows a low-power IoT device to directly communicate with heterogeneous wireless receivers at the minimum power consumption. Unlike existing…
In this paper, we present the design and test results of LOCx2-130, a low-power, low-latency, dual-channel transmitter ASIC for detector front-end readout. LOCx2-130 has two channels of encoders and serializers, and each channel operates at…
A noise-tolerant data communications fabric has been developed to meet the real-time data acquisition and control requirements of fast feedback loops, machine protection systems, pulse-to-pulse sequencing, and machine-experiment…
Multiple Electrostatic Quadrupole Array Linear Accelerators (MEQALACs) provide an opportunity to realize compact radio-frequency (RF) accelerator structures that can deliver very high beam currents. MEQALACs have been previously realized…
PIP-II is an 800 MEV superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an ion source, RFQ and buncher cavities along with 25 superconducting…
IEEE 802.11ad-based integrated sensing and communications (ISAC) have been identified as a potential solution for enabling next-generation intelligent transportation systems in the millimeter wave (mmW) spectrum. The radar functionality…
Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise,…
During the initial phase of operation, the linacs of the Next Linear Collider (NLC) will contain roughly 5000 X-Band accelerator structures that will accelerate beams of electrons and positrons to 250 GeV. These structures will nominally…