Related papers: Flame spread over thin circular PMMA rods
A combination of experimental techniques and molecular dynamics (MD) computer simulation is used to investigate the diffusion dynamics in Al80Ni20 melts. Experimentally, the self-diffusion coefficient of Ni is measured by the long-capillary…
Frontal polymerization (FP) enables rapid curing of thermosets via a self-sustaining thermal wave, but its propagation mechanism can shift dramatically depending on processing conditions. In this study, we investigate the effect of trigger…
Plasma technologies are a promising way of addressing a number of challenges in combustion, ranging from stabilization and flame-holding for hypersonic vehicles, to enabling low-emissions propulsion and power. Whereas most works in the…
Turbulence is of paramount importance in wildland fire propagation since it randomly transports the hot air mass that can pre-heat and then ignite the area ahead the fire. This contributes to give a random character to the firefront…
The spatial diffusion of an inhomogeneous vortex tangle is studied numerically with the vortex filament model. A localized initial tangle is prepared by applying a counterflow, and the tangle is allowed to diffuse freely after the…
We investigate effects of the magnetic field on the propagation of laminar flames of nuclear reactions taking place in white dwarfs (WDs) with the mass close to the Chandrasekhar limit. We calculate the velocities of laminar flames parallel…
We have used kinetic Monte Carlo (kMC) simulations of a lattice gas to study front fluctuations in the spreading of a non-volatile liquid droplet onto a solid substrate. Our results are consistent with a diffusive growth law for the radius…
The object of this paper is to study the influence of dispersed micrometer size particles on turbulent heat transfer mechanisms in wall-bounded flows. The strategic target of the current research is to set up a methodology to size and…
Directed sideward flow of light charged particles and intermediate mass fragments was measured in different symmetric reactions at bombarding energies from 90 to 800 AMeV. The flow parameter is found to increase with the charge of the…
We investigate and model pressure effects on the turbulent burning velocity over a wide range of pressures and turbulence intensities with the direct numerical simulation (DNS) of statistically planar turbulent premixed flames for lean…
Combustion of hydrogen can help in reducing carbon-based emissions but it also poses unique challenges related to the high flame speed and Lewis number effects of the hydrogen flame. When operated with conventional burners, a hydrogen flame…
We simulate short positive and negative streamers in air at standard temperature and pressure. They evolve in homogeneous electric fields or emerge from needle electrodes with voltages of 10 to 20 kV. The streamer velocity at given streamer…
We study analytically and numerically a model describing front propagation of a KPP reaction in a fluid flow. The model consists of coupled one-dimensional reaction-diffusion equations with different drift coefficients. The main rigorous…
Heat transfer by large deformable drops in a turbulent flow is a complex and rich in physics system, in which drops deformation, breakage and coalescence influence the transport of heat. We study this problem coupling direct numerical…
Understanding the propagation dynamics of premixed flames in confined spaces is important for fire safety in gas pipelines and for optimizing modern internal combustion engines. In sufficiently long channels, premixed flames routinely…
This paper investigates a predictive model that considers the impact of stretch on the dynamic response of laminar premixed conical and V- flames; the flame stretch consists of two components: the flame curvature and flow strain. The steady…
Flamelet-based methods are extensively used in modeling turbulent hydrocarbon flames. However, these models have yet to be established for (lean) premixed hydrogen flames. While flamelet models exist for laminar thermo-diffusively unstable…
The complete flow field surrounding a rotating cylinder is calculated by solving the Navier-Stokes equations using the finite difference method. The numerical simulation is performed on a transformed rectilinear grid, with axes representing…
In this paper, we report the first evidence of an enhancement of the heat transfer from a heated wire by an external turbulent flow of superfluid helium. We used a standard Pt-Rh hot-wire anemometer and overheat it up to 21 K in a…
We have studied the propagation of a crack front along the heterogeneous weak plane of a transparent poly(methyl methacrylate) (PMMA) block using two different loading conditions: imposed constant velocity and creep relaxation. We have…