Related papers: Thermophotovoltaic performance metrics and techno-…
We report the fabrication and measurement of thermophotovoltaic (TPV) cells with efficiencies of >40%, which is a record high TPV efficiency and the first experimental demonstration of the efficiency of high-bandgap tandem TPV cells. TPV…
A standardized method for measuring thermophotovoltaic (TPV) efficiency has not been yet established, which makes the reported results difficult to compare. Besides, most of the TPV efficiencies reported to date have been obtained using…
To facilitate the widespread adoption of renewable energy, dispatchable, zero-emission power sources are essential for grid stability. This work performs a comprehensive techno-economic analysis of a self-sustainable thermophotovoltaic…
Thermophotovoltaic (TPV) energy conversion efficiency has recently surpassed 30%. The key behind such high efficiency is the inclusion of a highly efficient mirror in the rear of the TPV cell that turns back to the thermal emitter the…
We evaluate near-field thermophotovoltaic (TPV) energy conversion systems focusing in particular on their open-circuit voltage (Voc). Unlike previous analyses based largely on numerical simulations with fluctuational electrodynamics, here,…
A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and PV cell is spectrally monochromatic, the TPV system can…
Thermophotovoltaics (TPVs) have the potential to exhibit higher power conversion efficiencies than traditional photovoltaics (PVs), with a broad range of applicability from waste recovery systems to aerospace solutions. They operate by…
Optimal radiator thermal emission spectra maximizing thermophotovoltaic (TPV) conversion efficiency and output power density are determined when temperature effects in the cell are considered. To do this, a framework is designed in which a…
Heat is an inevitable outcome in energy consumption processes, as more than 65% of input energy is wasted as heat. If we can generate electricity from waste heat, it will help minimize the needs for fossil fuels in power plants and can…
The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only…
The maximum efficiency for photovoltaic (PV) and thermoelectric generator (TEG) systems without concentration is investigated. Both a combined system where the TEG is mounted directly on the back of the PV and a tandem system where the…
A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell,…
Significant progress has been made in the field of thermophotovoltaics, with efficiency recently rising to over 40% due to improvements in cell design and material quality, higher emitter temperatures, and better spectral management.…
Thermophotovotaics convert thermal radiation from local heat sources to electricity. A new breakthrough in creating highly efficient thin-film solar cells can potentially enable thermophotovoltaic systems with unprecedented high efficiency.…
We report the first empirical efficiency measurement of germanium-based thermophotovoltaic devices under high-temperature, high-irradiance conditions using a high view-factor calorimetric setup. Two TPV cell architectures were fabricated on…
The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system is examined using an analytical model for four different types of commercial PVs and a commercial bismuth telluride TEG. The TEG is applied…
Thermophotovoltaic systems in principle enable utilization of heat that is usually regarded as wasted energy. However, the wavelength selectivity of the thermal emitter required for high efficiencies is rather difficult to control with…
This study explores the integration of thermoelectric generators (TEGs) and phase change materials (PCMs) to enhance the efficiency of photovoltaic (PV) panels in high-temperature conditions. An AP-PM-20 Polycrystalline PV panel,…
Thermophotovoltaic (TPV) converters are capable of generating electrical energy from infrared radiation emitted by an emitter powered by waste heat or solar energy. Key performance metrics for TPV converters are power output density (POD),…
Single-junction photovoltaic cells are considered to be efficient solar energy converters, but even ideal cells cannot exceed the their fundamental thermodynamic efficiency limit, first analysed by Shockley and Queisser (SQ). For moderated…