Related papers: Magnetic Force Microscopy: High Quality-Factor Two…
Quantitative Magnetic Resonance Imaging (MRI) is based on a two-steps approach: estimation of the magnetic moments distribution inside the body, followed by a voxel-by-voxel quantification of the human tissue properties. This splitting…
Atomic force microscopy (AFM) is one of the most promising methods for investigating the structure of materials at the micro and nanoscale levels, as well as their local physical-mechanical properties. The experimental data obtained with…
The force sensor is key to the performance of atomic force microscopy (AFM). Nowadays, most AFMs use micro-machined force sensors made from silicon, but piezoelectric quartz sensors are applied at an increasing rate, mainly in vacuum. These…
A common use for atomic force microscopy is to quantify local forces through tip-sample interactions between the probe tip and a sample surface. The accuracy of these measurements depends on the accuracy to which the cantilever spring…
Magnetic Resonance Force Microscopy (MRFM) is an emergent technology for measuring spin-induced attonewton forces using a micromachined cantilever. In the interrupted Oscillating Cantilever-driven Adiabatic Reversal (iOSCAR) method, small…
Nonlinear interferometers that replace beamsplitters in Mach-Zehnder interferometers with nonlinear amplifiers for quantum-enhanced phase measurements have drawn increasing interest in recent years, but practical quantum sensors based on…
Sensing a magnetic field with an atomic magnetometer operated in real time presents significant challenges, primarily due to sensor non-linearity, the presence of noise, and the need for one-shot estimation. To address these challenges, we…
As integrated circuit (IC) geometry and packaging become more sophisticated with ongoing fabrication and design innovations, the electrical engineering community needs increasingly-powerful failure analysis (FA) methods to meet the growing…
In 2D field effect transistors the gate electrostatically dopes the 2D semiconductor (2DSC) channel, tuning the Fermi level. In principle, Kelvin probe force microscopy (KPFM) can detect the Fermi level, and its dependence on gate bias as…
The functionalization of an Atomic Force Microscope (AFM) cantilever with a colloidal bead is a widely used technique when the geometry between the probe and the sample must be controlled, particularly in force spectroscopy. But some…
We report the experimental realization of a quantum silicon carbide microscope (QSiCM) and demonstrate its functionality by imaging magnetic fields generated by electrical currents. We employ a dual-frequency sensing protocol to enhance the…
Light-field microscopy (LFM) is a 3D microscopy technique whereby volumetric information of a sample is gained by simultaneously capturing both the position and momentum (angular) information of light illuminating a scene. Conventional LFM…
Atomic force microscopes have proved to be fundamental research tools in many situations where a gentle imaging process is required, and in a variety of environmental conditions, such as the study of biological samples. Among the possible…
Various methods of force measurement with the Atomic Force Microscope (AFM) are compared for their ability to accurately determine the tip-surface force from analysis of the nonlinear cantilever motion. It is explained how intermodulation,…
We report a Kelvin probe force microscopy (KPFM) implementation using the dissipation signal of a frequency modulation atomic force microscopy that is capable of detecting the gradient of electrostatic force rather than electrostatic force.…
The Photonic Force Microscope (PFM) is an opto-mechanical technique based on an optical trap that can be assumed to probe forces in microscopic systems. This technique has been used to measure forces in the range of pico- and femto-Newton,…
Optically pumped magnetometers (OPMs) have emerged as a powerful technique for high-resolution magnetic field imaging. However, achieving sub-millimeter spatial resolution at sub-picotesla sensitivities ($\mathrm{< 1\,pT/\sqrt{Hz}}$)…
The quantitative measurement of viscoelasticity of nano-scaleentities is an important goal of nanotechnology research and there is considerable progress with advent of dynamic Atomic Force Microscopy. The hydrodynamics of cantilever, the…
Intercalation of two dimensional materials, particularly transition metal dichalcogenides, is a noninvasive way to modify electronic, optical and structural properties of these materials. However, research of these atomic-scale phenomena…
The quantitative interatomic force measurements open a new pathway to materials characterization, surface science, and chemistry by elucidating the force between 'two' interacting atoms as a function of their separation. Atomic force…