Related papers: Enhancing noise characterization with robust time …
For the LISA and Taiji missions, both transient and continuous data anomalies would pose significant challenges to the detection, estimation, and subsequent scientific interpretation of gravitational wave signals. As is indicated by the…
Laser frequency noise suppression is a critical requirement for the Laser Interferometer Space Antenna (LISA) mission to detect gravitational waves. The baseline laser stabilization is achieved using cavity pre-stabilization and a…
Time-Delay Interferometry (TDI) is the data processing technique needed for generating interferometric combinations of data measured by the multiple Doppler readouts available onboard the three LISA spacecraft. Within the space of all…
Using a Nd:YVO4 microchip laser with a relaxation frequency in the megahertz range, we have experimentally compared a heterodyne interferometer based on a Michelson configuration with an autodyne interferometer based on the laser optical…
We report on three numerical experiments on the implementation of Time-Delay Interferometry (TDI) for LISA, performed with Synthetic LISA, a C++/Python package that we developed to simulate the LISA science process at the level of…
Clock noise is one of the dominant noises in the space-borne gravitational wave (GW) detection. To suppress this noise, the clock noise-calibrated time-delay-interferometry (TDI) technique is proposed. In this technique, an inter-spacecraft…
Data from the Laser Interferometer Space Antenna (LISA) is expected to be dominated by frequency noise from its lasers. However the noise from any one laser appears more than once in the data and there are combinations of the data that are…
The proposed Laser Interferometer Space Antenna (LISA) mission is tasked with the detection and characterization of gravitational waves from various sources in the universe. This endeavor is challenged by transient displacement and…
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase…
Self-heterodyne fiber interferometers have been shown to be capable of stabilizing lasers to ultra-narrow linewidths and present an excellent alternative to high finesse cavities for frequency stabilization. In addition to suppressing…
Previous work demonstrated effective laser frequency noise (LFN) suppression for Laser Interferometer Space Antenna (LISA) data from raw phasemeter measurements using a Markov Chain Monte Carlo (MCMC) algorithm with fractional delay…
Time-Delay Interferometry (TDI) is the data processing technique that cancels the large laser phase fluctuations affecting the one-way Doppler measurements made by unequal-arm space-based gravitational wave interferometers. By taking finite…
The ongoing development of the space-based laser interferometer missions is aiming at unprecedented gravitational wave detections in the millihertz frequency band. The spaceborne nature of the experimental setups leads to a degree of…
Tilt-to-length (TTL) coupling is expected to be one of the major noise sources in the interferometric phase readouts in TianQin mission. Arising from the angular motion of spacecraft (SC) and the onboard movable optical subassemblies…
The success of LISA Pathfinder in demonstrating the LISA drag-free requirement paved the road of using space missions for detecting low-frequency and middle-frequency GWs. The new LISA GW mission proposes to use arm length of 2.5 Gm (1 Gm =…
This paper presents a novel method for laser frequency stabilisation in the Laser Interferometer Space Antenna (LISA) mission by locking a laser to two stable length references - the arms of the interferometer and an on-board optical…
A crucial challenge to the ongoing endeavor of spaceborne gravitational wave (GW) detection resides in the laser phase noise, typically 7 to 8 orders of magnitude above the inevitable noise. The arm locking technique was proposed to…
Accurate and efficient modeling of the Laser Interferometer Space Antenna (LISA) response is crucial for gravitational-wave (GW) data analysis. A key computational challenge lies in evaluating time-delay interferometry (TDI) variables,…
The LISA mission is the future space-based gravitational wave (GW) observatory of the European Space Agency. It is formed by 3 spacecraft exchanging laser beams in order to form multiple real and virtual interferometers. The data streams to…
Heterodyne interferometry for precision science often comes with an optical phase modulation, for example, for intersatellite clock noise transfer for gravitational wave (GW) detectors in space, exemplified by the Laser Interferometer Space…