Related papers: Single MoS2-flake as a high TCR non-cryogenic bolo…
In order to provide secure clamping with a low thermal conductance, some low temperature detectors are held with point contact sapphire ball clamps. While this method is increasingly common, the thermal conductance across this interface has…
The thermal conductivity of suspended few-layer hexagonal boron nitride (h-BN) was measured using a micro-bridge device with built-in resistance thermometers. Based on the measured thermal resistance values of 11-12 atomic layer h-BN…
We are developing multi-chroic antenna-coupled TES detectors for CMB polarimetry. Multi-chroic detectors increase the mapping speed per focal plane area and provide greater discrimination of polarized galactic foregrounds with no increase…
Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and…
An environmentally stable mesoscopic thin film of Au of certain thickness has been deposited thermally on top of a Ag+ implanted oxide substrate to develop a close to room temperature superconductor. This thin film has been deposited in two…
In 2016, bulk tellurium was experimentally observed as a remarkable thermoelectric material. Recently, two-dimensional (2D) tellurium, called tellurene, has been synthesized and has exhibited unexpected electronic properties compared with…
We report the photoresponse of vertically aligned graphene upon IR irradiation at room temperature. Four probe measurements have shown electrical switching in I-V characteristics during pulsed IR irradiation. The photoresponse reported here…
We have developed a bolometric detector that is intrinsically sensitive to linear polarization which is optimized for making measurements of the polarization of the cosmic microwave background radiation. The receiver consists of a pair of…
We present a study of thin-film molybdenum resistors for NbN electronics operating at cryogenic temperatures. The key step is the 0.5-1.5 keV ion cleaning-activation of NbN before Mo deposition which allows to obtain a high-quality Mo/NbN…
We calculate the effects of doping nanostructuration and the patterning of thin films of high-temperature superconductors (HTS) with the aim of optimizing their functionality as sensing materials for resistive transition-edge bolometer…
The behaviors of resistance, magnetoresistance (up to 5 T), and Hall electromotive force (EMF) with varying temperature (from 10 to 300 K) and measuring current (from 10 mkA to 10 mA) are studied for the Si sample with CrSi2…
The sensitive dependence of electronic and thermoelectric properties of MoS$_2$ on the applied strain opens up a variety of applications in the emerging area of straintronics. Using first principles based density functional theory…
A network identification by deconvolution (NID) method is applied to the thermal transient response of packaged and unpackaged microcoolers. A thin film resistor on top of the device is used as the heat source and the temperature sensor.…
Torsional oscillator (TO) is an experimental technique which is widely used to investigate superfluid responses in helium systems confined in porous materials or adsorbed on substrates. In these systems, heat capacity (HC) is also an…
Thermal properties have an outsized impact on efficiency and sensitivity of devices with nanoscale structures, such as in integrated electronic circuits. A number of thermal conductivity measurements for semiconductor nanostructures exist,…
A high temperature superconducting detector was fabricated to capture the thermal images in room temperature background. The detector was made of YBa2Cu3O7-{\delta} (YBCO) superconducting thin film deposited on an Yttria Stabilized Zirconia…
Photodetectors based on two dimensional materials have attracted growing interest. However, the sensitivity is still unsatisfactory even under high gate voltage. Here we demonstrate a MoS2 photodetector with a poly(vinylidene…
Engineering thermal transport in two dimensional materials, alloys and heterostructures is critical for the design of next-generation flexible optoelectronic and energy harvesting devices. Direct experimental characterization of lattice…
Monolayer tungsten disulfide ($WS_2$) has recently attracted large interest as a promising material for advanced electronic and optoelectronic devices such as photodetectors, modulators, and sensors. Since these devices can be integrated in…
For the development of nanoscale electronics and photonics using atomically thin two-dimensional (2D) materials, it is important to realize van der Waals (vdW) interfaces with low thermal resistance, to minimize performance reduction caused…