Related papers: 3-way equal filtering power divider using compact …
This work proposes a novel low-complexity digital backpropagation (DBP) method, with the goal of optimizing the trade-off between backpropagation accuracy and complexity. The method combines a split step Fourier method (SSFM)-like structure…
An upgraded and improved version of the focal plane detector (FPD) of the large-acceptance magnetic spectrometer MAGNEX is described here. The FPD consists of a tracker operating at low pressure and of a silicon detector wall. Thanks to a…
High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of…
This work reports an acoustic filter at 23.5 GHz with a low insertion loss (IL) of 2.38 dB and a 3-dB fractional bandwidth (FBW) of 18.2%, significantly surpassing the state-of-the-art. The device leverages electrically coupled acoustic…
A self-packaged dual-band bandpass filter (DBBPF) with high isolation and low insertion loss (IL) for 5G applications is proposed in this paper. To get high stopband suppression, multiple and controllable transmission zeros (TZs) are…
We present a dual cut-off, dc-tunable low-pass microwave filter on a superconducting Nb microstrip with uniaxial asymmetric nanogrooves. The frequency response of the device was measured in the range $300$\,KHz to $14$\,GHz at different…
A low-profile, modified Complementary Frequency Selective Surface (CFSS) with dual band-pass characteristic is presented. This technique adds independent control of the operation bands, which was a limitation from previous FSSs design based…
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally…
Orthogonal frequency division multiplexing (OFDM) is an emerging research field of wireless communication. It is one of the most proficient multi-carrier transmission techniques widely used today as broadband wired & wireless applications…
The plane wave method is most widely used for solving the Kohn-Sham equations in first-principles materials science computations. In this procedure, the three-dimensional (3-dim) trial wave functions' fast Fourier transform (FFT) is a…
In this paper, an incremental selective decode-and-forward (ISDF) relay strategy is proposed for power line communication (PLC) systems to improve the spectral efficiency. Traditional decode-and-forward (DF) relaying employs two time slots…
In this paper, we propose a novel splitting receiver, which involves joint processing of coherently and non-coherently received signals. Using a passive RF power splitter, the received signal at each receiver antenna is split into two…
To achieve multi-Gb/s data rates in 6G optical wireless access networks based on narrow infrared (IR) laser beams, a high-speed receiver with two key specifications is needed: a sufficiently large aperture to collect the required optical…
In this paper analysis is given to find the third order intermodulation power given sinusoids are fed into a nonlinear device. A simple expression of the third order intermodulation power is given for the case that the center frequencies of…
This paper proposes a functionally reconfigurable integrated structure of a Fabry-Perot (FP) antenna and wideband liquid absorber. The partial reflecting surface (PRS) is elaborately tailored to serve as both a component of the FP antenna…
We present a compact and efficient design in terms of gain, bandwidth and dynamical range for the Josephson mixer, the superconducting circuit performing three-wave mixing at microwave frequencies. In an all lumped-element based circuit…
Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with…
A new approach for designing the single-band and dual-band balanced bandpass filters (BPFs) based on the circular patch resonator is proposed in this work. By modifying the output balanced ports of the balanced BPFs to inhibit or transport…
This work introduces a novel, compact antenna design based on a lambda-6th suspended patch configuration that is particularly suited for small-size wireless sensor nodes. The proposed design meets key requirements such as compactness,…
Frequency-modulated (FM) laser combs, which offer a periodic quasi-continuous-wave output and a flat-topped optical spectrum, are emerging as a promising solution for wavelength-division multiplexing applications, precision metrology, and…