Related papers: Exploring the Theoretical Limits of Efficiency in …
The GaAs/AlGaAs materials system is well suited to multi-bandgap applications such as the multiple quantum well solar cell. GaAs quantum wells are inserted in the undoped AlGaAs active region of a pin structure to extend the absorption…
Organic-inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cell building blocks. Their high light absorption coefficients and long diffusion lengths suggest high power conversion efficiencies…
Silicon solar cells dominate the solar cell market with record lab efficiencies reaching almost 26%. However, after 60 years of research, this efficiency saturated close to the theoretical limit for silicon, and radically new approaches are…
The maximal concentration limit of solar radiation for photovoltaic applications is assumed to be constant, at Cmax\approx46,000 suns. This limit is easily found via a geometrical application of the 2nd law of thermodynamics to a radiation…
Recombination through quantum dots (QDs) is a major factor that limits efficiency of QD intermediate-band (IB) solar cells. Our proposal for a new IB solar cell based on type-II GaSb QDs located outside the depletion region of a GaAs…
In conventional solar cell semiconductor materials (predominantly Si) photons with energy higher than the band gap initially generate hot electrons and holes, which subsequently cool down to the band edge by phonon emission. Due to the…
In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry…
Thermophotovotaics convert thermal radiation from local heat sources to electricity. A new breakthrough in creating highly efficient thin-film solar cells can potentially enable thermophotovoltaic systems with unprecedented high efficiency.…
Highly efficient, environmental friendly and renewable sources of energy are of great need today to combat with increasing energy demands and environmental pollution. In this work, we have investigated the novel 2D allotropes i.e.,…
It has gradually been recognized that incoming sunlight can be trapped within a high refractive index semiconductor, n~3.5, owing to the narrow 16degree escape cone. The solar light inside a semiconductor is 4n^2 times brighter than…
Photon recycling is required for a solar cell to achieve an open-circuit voltage ($V_{OC}$) and power conversion efficiency (PCE) approaching the Shockley-Queisser theoretical limit. In metal halide perovskite solar cells, the achievable…
Using the Spectroscopic Limited Maximum Efficiency, and Shockley and Queisser predictor models, we compute the solar efficiency of the chalcopyrites AgMX2(M=In,Al;X=S,Se,Te). The results presented are based on the estimation of the…
The intermediate band solar cell (IBSC) and quantum ratchet solar cell (QRSC) have the potential to surpass the efficiency of standard single-junction solar cells by allowing sub-gap photon absorption through states deep inside the band…
Light fusion increases the efficiency of solar cells by converting photons with lower energy than the bandgap into higher energy photons. The solar cell converts the product photons to current. We use Monte Carlo simulation to predict that…
Intermediate Band Solar Cell is an advanced concept for solar energy conversion in which two low-energy photons can promote an electron to the conduction band through a so-called intermediate band. To limit recombination and preserve the…
High efficiencies of >30% are predicted for series-connected tandem solar cells when current-matching is achieved between the wide-bandgap top cell and silicon bottom cell. Sub-cells are typically optimised for current-matching based on the…
The use of photoferroic materials that combine ferroelectric and light harvesting properties in a photovoltaic device is a promising route to significantly improve the efficiency of solar cells. These materials do not require the formation…
Epitaxially-grown quantum well and quantum dot solar cells suffer from weak light absorption, strongly limiting their performance. Light trapping based on optical resonances is particularly relevant for such devices to increase light…
Hot-carrier solar cells use the photon excess energy, that is, the energy exceeding the absorber bandgap, to do additional work. These devices have the potential to beat the upper limit for the photovoltaic power conversion efficiency set…
In this paper we study CdS/CdTe solar cells by means of AMPS-1D software. First we study the effect of thickness of semiconductor layers on the output parameters of the CdS/CdTe solar cell, such as density of short-circuit current, open…