Related papers: In-situ Doppler-free spectroscopy with pulsed opti…
An optical frequency comb generated with an electro-optic phase modulator and a chirped radiofrequency waveform is used to perform saturation and pump-probe spectroscopy on the $D_1$ and $D_2$ transitions of atomic potassium. With a comb…
We describe experiments with an optical frequency standard based on a laser cooled $^{171}$Yb$^+$ ion confined in a radiofrequency Paul trap. The electric-quadrupole transition from the $^2S_{1/2}(F=0)$ ground state to the $^2D_{3/2}(F=2)$…
We propose a novel method that uses the oscillation of an atomic excited wave packet observed through a pump-probe technique to accurately determine the zero time delay between a pair of ultrashort laser pulses. This physically-based…
Quantitative spectroscopy has been used to measure accurately the Doppler-broadening of atomic transitions in $^{85}$Rb vapor. By using a conventional platinum resistance thermometer and the Doppler thermometry technique, we were able to…
We have performed polarization spectroscopy and sub-Doppler DAVLL on the (5s5s) 1^S_0 -> (5s5p) 1^P_1 transition of atomic strontium. Both techniques generated a dispersion-type lineshape suitable for laser stabilization, without the need…
We present a driving scheme for solid-state quantum emitters using frequency-swept pulses containing a spectral hole resonant with the optical transition in the emitter. Our scheme enables high-fidelity state inversion, exhibits robustness…
This paper shows analytically and numerically that a vortex plate coupled to a neutral density filter can deliver a true optical derivative when placed at the focal plane of a $2f$ lens pair. This technique turns spatial variations in…
Pump-probe microscopy enables label-free imaging of structural and chemical features of samples. However, signals in pump-probe microscopy are typically small and often must be measured in the presence of large backgrounds. As a result,…
This work reports on the application of a novel electric field-ionization setup for high-resolution laser spectroscopy measurements on bunched fast atomic beams in a collinear geometry. In combination with multi-step resonant excitation to…
High brightness and low coherence laser sources with wideband tunability are essential for many full-field imaging applications aiming for high contrast and speckle free performance. However, this combination of parameters is challenging to…
The influence of the phase fluctuation of the pump laser on the phase-correlation between the signal and idler modes of the output fields from as non-degenerate optical parametric oscillator operating above oscillation threshold was…
We demonstrate a lock-in particle tracking scheme in optical tweezers based on stroboscopic modulation of an illuminating optical field. This scheme is found to evade low frequency noise sources while otherwise producing an equivalent…
Stokes polarimetry is widely used to extract the polarisation structure of optical fields, typically from six measurements, although it can be extracted from only four. To measure the required intensities, most approaches are based on…
The multi-dithering method has been well verified in phase locking of polarization coherent combination experiment. However, it is hard to apply to low repetition frequency pulsed lasers, since there exists an overlap frequency domain…
We demonstrate a femtosecond pump-probe spectrometer which utilizes a white light supercontinuum as input, and relies on mutual synchronization of acousto-optical chopper, pump-probe delay stage and the CCD camera to record shot-to-shot…
A novel approach for measuring fast oscillations of an absolute value of interferometer optical path difference (OPD) has been developed. The principles of frequency-scanning interferometry are utilized for registration of the…
We present an optical scheme that realizes the standard von Neumann measurement model, providing an indirect measurement of a quadrature of the field with controllable Gaussian state-reduction. The scheme is made of simple optical elements,…
Sampling is the first step to convert an analogue optical signal into a digital electrical signal. The latter can be further processed and analysed by well-known electrical signal processing methods. Optical pulse sources like mode-locked…
Optically active quantum dots, for instance self-assembled InGaAs quantum dots, are potentially excellent single photon sources. The fidelity of the single photons is much improved using resonant rather than non-resonant excitation. With…
This work focuses on the incoherent and coherent combination of pulsed laser beams, building on previous research [1] that addressed the combination of continuous-wave laser beams. For the pulsed combination, we have focused on the temporal…