Related papers: Perovskite Phase Heterojunction Solar Cells
Photoluminescence (PL) is a ubiquitous proxy for material quality in optoelectronic devices, widely used for high-throughput materials discovery. However, we demonstrate that in the presence of charge-selective contacts, PL loses its…
We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination, over multiple orders of…
Recently, significant progress in the development of III-V/Si dual-junction solar cells has been achieved. This not only boosts the efficiency of Si-based photovoltaic solar cells, but also offers the possibility of highly efficient green…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
A contactless effective series resistance imaging method for large area perovskite solar cells that is based on photoluminescence imaging with non-uniform illumination is introduced and demonstrated experimentally. The proposed technique is…
Hybrid halide perovskites are currently under intense investigation due to their potential applications in optoelectronics and solar cells. Among them, MAPbI$_3$ where MA stands for the methylammonium cation, exhibits ideal properties for…
Organic-inorganic halide perovskite solar cells have attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. More recent efforts show that the reduction from three- to two-dimensions…
Perovskite solar cells have shown remarkable efficiencies beyond 22%, through organic and inorganic cation alloying. However, the role of alkali-metal cations is not well-understood. By using synchrotron-based nano-X-ray fluorescence and…
Chalcogenide perovskites have emerged as non-toxic and stable photovoltaic materials, acting as an alternative to lead halide hybrid perovskites having similar optoelectronic properties. In the present work, we report the electronic and…
Defect engineering is applied to hybrid (CH$_3$NH$_3$)PbI$_3$ organic-inorganic perovskites. These materials have become one of the most promising low-cost alternatives to traditional semiconductors in the field of photovoltaics and light…
With the rapid advancement of photovoltaic science, there has been an increasing focus on the development of environment-friendly and structurally advanced perovskite solar cells (PSCs). In this context, this study investigates an…
We studied the recombination dynamics of charge carriers in organic bulk heterojunction solar cells made of the blend system poly(2,5-bis(3-dodecyl thiophen-2-yl) thieno[2,3-b]thiophene) (pBTCT-C12):[6,6]-phenyl-C61-butyric acid methyl…
Ionic migration has been proposed as a possible cause of photovoltaic current-voltage hysteresis in hybrid perovskite solar cells. However, a major objection to this hypothesis is that hysteresis can be reduced by changing the interfacial…
Methylammonium lead iodide (CH3NH3PbI3) perovskite solar cell has produced a remarkable breakthrough in the photovoltaic history of solar cell technology because of its outstanding device based performance as a light-harvesting…
Four {\pi}-extended phosphoniumfluorene electrolytes ({\pi}-PFEs) are introduced as hole-blocking layers (HBL) in inverted architecture planar perovskite solar cells (PVSCs) with the structure of ITO/PEDOT:PSS/MAPbI3/PCBM/HBL/Ag. The…
We report that device architecture engineering has a substantial impact on the reverse bias instability that has been reported as a critical issue in commercializing perovskite solar cells. We demonstrate breakdown voltages exceeding -15 V…
Interfaces between the perovskite active layer and the charge-transport layers (CTLs) play a critical role in both efficiency and stability of halide-perovskite photovoltaics. One of the major concerns is that surface defects of perovskite…
Perovskite-silicon tandem technology has exceeded the single junction theoretical efficiency limit. However, there is still distance to the thermodynamic limit mainly caused by the fill factor. This work presents a methodology to illustrate…
Organic-inorganic coupling in the hybrid lead-halide perovskite is a central issue in rationalizing the outstanding photovoltaic performance of these emerging materials. Here we compare and contrast the evolution of structure and dynamics…
Presented here is the optimization of a planar two-terminal perovskite/silicon tandem solar cell with a texture structure. The developed simulation model is fitted to published experimental results, and the importance of current matching in…