Related papers: A 4x32Gb/s 1.8pJ/bit Collaborative Baud-Rate CDR w…
We present a Reinforcement Learning (RL) approach to the problem of controlling the Discontinuous Reception (DRX) policy from a Base Transceiver Station (BTS) in a cellular network. We do so by means of optimally timing the transmission of…
This work presents a new frequency acquisition method using semi-rotational frequency detection (SRFD) algorithm for a reference-less clock and data recovery (CDR) in a serial-link receiver. The proposed SRFD algorithm classifies the…
We present a new asynchronous quasi-delay-insensitive (QDI) block carry lookahead adder with redundancy carry (BCLARC) realized using delay-insensitive dual-rail data encoding and 4-phase return-to-zero (RTZ) and 4-phase return-to-one (RTO)…
We consider a single-anchor multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system with imperfectly synchronized transmitter (Tx) and receiver (Rx) clocks, where the Rx estimates its position based on…
The Discontinuous Reception (DRX) mechanism is commonly employed in current LTE networks to improve energy efficiency of user equipment (UE). DRX allows UEs to monitor the physical downlink control channel (PDCCH) discontinuously when there…
In this paper, we propose algorithms to minimize the energy consumption in millimeter wave/terahertz multi-user downlink communication systems. To ensure coverage in blockage-vulnerable high frequency systems, we consider cooperative…
Neural radiance fields (NeRF) have transformed 3D reconstruction and rendering, facilitating photorealistic image synthesis from sparse viewpoints. This work introduces an explicit data reuse neural rendering (EDR-NR) architecture, which…
In this paper we propose and investigate the performance of a multi-channel scheduling algorithm based on the well-known deficit round-robin (DRR), which we call multi-channel DRR (MCDRR). We extend the original DRR to the case of multiple…
In this paper, we investigate a distributed multi-input multi-output and orthogonal frequency division multiplexing (MIMO-OFDM) dual-function radar-communication (DFRC) system, which enables simultaneous communication and sensing in…
Discontinuous reception (DRX), where a user equip-ment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely tobe particularly aggressively used in the mmWave and THzfrequencies…
In this paper, we present a theoretical analysis of different integrating front-ends employed in broad-band communications through \textit{lossy} channels. Time-domain receivers for broad-band communication typically deal with large…
In this work, a novel energy-recycling single-antenna full-duplex (FD) radio is designed, in which a new 3-port element including a power divider and an energy harvester is added between the circulator and the receiver (RX) chain. The…
Rate splitting (RS) and wireless edge caching are essential means for meeting the quality of service requirements of future wireless networks. In this work, we focus on the cross-layer co-design of wireless edge caching schemes with…
In this paper, a novel transmissive reconfigurable meta-surface (RMS) transceiver enabled multi-tier computing network architecture is proposed for improving computing capability, decreasing computing delay and reducing base station (BS)…
This paper proposes a Low-Power, Energy Efficient 4-bit Binary Coded Decimal (BCD) adder design where the conventional 4-bit BCD adder has been modified with the Clock Gated Power Gating Technique. Moreover, the concept of DVT (Dual-vth)…
Resource allocation in integrated sensing and communication (ISAC) systems needs to be optimized to balance the requirements of the communication and sensing modules considering complicated cross-layer data traffic and queue status in…
Due to the recent re-allocation of the 5.9 GHz band by the US Federal Communications Commission (FCC), it will be inevitable that dedicated short-range communications (DSRC) and cellular vehicle-to-everything (C-V2X), two representative…
6G industrial in-X subnetworks are expected to support highly time-critical alarm reporting in large-scale environments characterized by mobility, bursty event-driven traffic, and limited radio resources. In such settings, conventional…
3GPP Release 18 cell discontinuous transmission and reception (cell DTX/DRX) is an important new network energy saving feature for 5G. As a time-domain technique, it periodically aggregates the user data transmissions in a given duration of…
Cooperative intelligent transport systems rely on a set of Vehicle-to-Everything (V2X) applications to enhance road safety. Emerging new V2X applications like Advanced Driver Assistance Systems (ADASs) and Connected Autonomous Driving (CAD)…