Related papers: A 97% Peak Efficiency Single-Inductor-Multiple-Out…
This paper describes a pipelined analog-to-digital converter (ADC) employing a power and area efficient architecture. The adjacent stages of a pipeline share operational amplifiers. In order to keep accuracy of the amplifiers in the first…
In this paper, a full-bridge boost power converter topology is studied for power factor control, using output high order sliding mode control. The AC/DC converters are used for charging the battery and super-capacitor in hybrid electric…
In present work a new XNOR gate using three transistors has been presented, which shows power dissipation of 550.7272$\mu$W in 0.35$\mu$m technology with supply voltage of 3.3V. Minimum level for high output of 2.05V and maximum level for…
The ability to maximize the performance during peak workload hours and minimize the power consumption during off-peak time plays a significant role in the energy-efficient systems. Our previous work has proposed a high-performance…
We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to…
Non-reciprocal charge transport in supercurrent diodes (SDs) polarized growing interest in the last few years for its potential applications in superconducting electronics (SCE). So far, SD effects have been reported in complex hybrid…
The operation of an integrated two-dimensional complementary metal-oxide-semiconductor inverter with well-matched input/output voltages is reported. The circuit combines a few-layer MoS2 n-MOSFET and a black phosphorus (BP) p-MOSFET…
A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along…
This paper proposes a new single input multiple output power supply by integrating a flyback converter and several buck converters. The flyback converter works as the main regulator, and the buck converters provide series voltage…
The Equivalent Series Resistance (ESR) of the output capacitor may cause output voltage Vo jumps, that are not modeled commonly for second order DC-DC converters, i.e., converters with two second order switched subsystems. These jump…
We consider the problem of grid-forming control of power converters in low-inertia power systems. Starting from an average-switch three-phase inverter model, we draw parallels to a synchronous machine (SM) model and propose a novel…
Voltage Source Converters (VSC) are becoming more common in modern High Voltage DC (HVDC) transmission systems. One of the major challenges in a multi-terminal VSCHVDC is protection against DC side faults. Two major designs, namely, the…
Strain engineering has played a key role in modern silicon electronics, having been introduced as a mobility booster in the 1990s and commercialized in the early 2000s. Achieving similar advances with two-dimensional (2D) semiconductors in…
This article presents novel high speed and low power full adder cells based on carbon nanotube field effect transistor (CNFET). Four full adder cells are proposed in this article. First one (named CN9P4G) and second one (CN9P8GBUFF)…
A modular, programmable, and high performance Power Gating strategy, called cluster based tunable sleep transistor cell Power Gating, has been introduced in the present paper with a few modifications. Furthermore, a detailed comparison of…
High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…
In this paper a CMOS operational amplifier is presented which operates at 2V power supply and 1microA input bias current at 0.8 micron technology using non conventional mode of operation of MOS transistors and whose input is depended on…
This paper reviews commonly used three-phase isolated AC-DC converters and introduces a novel Y-configuration Active Bridge (YAB) converter for single-stage isolated AC-DC power conversion. The proposed YAB addresses the limitations of…
This paper proposes a novel integrated multiport bidirectional dc-dc converter to interface the battery, the ultra-capacitor, the fuel cell, or other energy sources with the dc-link capacitor of the hybrid energy systems such as the hybrid…
This paper addresses the problem of regulating the output voltage of a DC-DC buck-boost converter feeding a constant power load,which is a problem of current practical interest. Designing a stabilising controller is theoretically…