Related papers: Legged Robot State Estimation within Non-inertial …
Legged robots carry an IMU, but the inertial solution drifts because consumer-grade IMUs are noisy. However, the feet create intermittent contacts with the environment that can be used to mitigate that drift. This report develops a sequence…
Implementing dynamic locomotion behaviors on legged robots requires a high-quality state estimation module. Especially when the motion includes flight phases, state-of-the-art approaches fail to produce reliable estimation of the robot…
Kalman Filter requires the true parameters of the model and solves optimal state estimation recursively. Expectation Maximization (EM) algorithm is applicable for estimating the parameters of the model that are not available before Kalman…
State estimation is a fundamental requirement in robotics, where the accurate determination of a robot's state is essential for stable operation despite inherent process disturbances and sensor noise. Traditionally, this is achieved through…
State-of-the-art robotic perception systems have achieved sufficiently good performance using Inertial Measurement Units (IMUs), cameras, and nonlinear optimization techniques, that they are now being deployed as technologies. However, many…
Rotor-based hopping locomotion significantly improves efficiency and operation time as compared to purely flying systems; where most hopping robots use the liftoff states and an assumed ballistic trajectory to determine the hopping height.…
Predicting the behavior of a dynamical system from noisy observations of its past outputs is a classical problem encountered across engineering and science. For linear systems with Gaussian inputs, the Kalman filter -- the best linear…
Estimating the impact intensity is one of the significant tasks of the legged robot. Accurate feedback of the impact may support the robot to plan a suitable and efficient trajectory to adapt to unknown complex terrains. Ordinarily, this…
Robust and accurate proprioceptive state estimation of the main body is crucial for legged robots to execute tasks in extreme environments where exteroceptive sensors, such as LiDARs and cameras, may become unreliable. In this paper, we…
We propose a nonlinear observer to estimate the state (orientation and in-plane velocity vector) of the quadrotor, based on a drag-force-enhanced model. It is an alternative to recent works using a similar model together with an Extended…
State of the art legged robots are either capable of measuring torque at the output of their drive systems, or have transparent drive systems which enable the computation of joint torques from motor currents. In either case, this sensor…
This paper deals with the problem of state estimation for a class of linear time-invariant systems with quadratic output measurements. An immersion-type approach is presented that transforms the system into a state-affine system by adding a…
High-frequency and accurate state estimation is crucial for biped robots. This paper presents a tightly-coupled LiDAR-Inertial-Kinematic Odometry (LIKO) for biped robot state estimation based on an iterated extended Kalman filter. Beyond…
This work proposes a resilient and adaptive state estimation framework for robots operating in perceptually-degraded environments. The approach, called Adaptive Maximum Correntropy Criterion Kalman Filtering (AMCCKF), is inherently robust…
This paper develops a novel slip estimator using the invariant observer design theory and Disturbance Observer (DOB). The proposed state estimator for mobile robots is fully proprioceptive and combines data from an inertial measurement unit…
We propose a novel state estimator for legged robots, STEP, achieved through a novel preintegrated foot velocity factor. In the preintegrated foot velocity factor, the usual non-slip assumption is not adopted. Instead, the end effector…
Accurate state estimation is critical for legged and aerial robots operating in dynamic, uncertain environments. A key challenge lies in specifying process and measurement noise covariances, which are typically unknown or manually tuned. In…
Accurate estimation of noise parameters is critical for optimal filter performance, especially in systems where true noise parameter values are unknown or time-varying. This article presents a quaternion left-invariant extended Kalman…
State estimation is an important aspect in many robotics applications. In this work, we consider the task of obtaining accurate state estimates for robotic systems by enhancing the dynamics model used in state estimation algorithms.…
In this paper, we focus on developing an Invariant Extended Kalman Filter (IEKF) for extended pose estimation for a noisy system with state equality constraints. We treat those constraints as noise-free pseudo-measurements. To this aim, we…