Related papers: Stretchable Pneumatic Sleeve for Adaptable, Low-Di…
Mechanically characterizing the human-machine interface is essential to understanding user behavior and optimizing wearable robot performance. This interface has been challenging to sensorize due to manufacturing complexity and non-linear…
The motivation of our current research is to devise motion planners for legged locomotion that are able to exploit the robot's actuation capabilities. This means, when possible, to minimize joint torques or to propel as much as admissible…
Soft pneumatic actuators enable safe human-machine interaction with lightweight and powerful applied parts. On the other side, they suffer design limitations as regards complex actuation patterns, including minimum bending radii,…
Exoskeletons show great promise for enhancing mobility, but providing appropriate assistance remains challenging due to the complexity of human adaptation to external forces. Current state-of-the-art approaches for optimizing exoskeleton…
Haptic upper limb exoskeletons are robots that assist human operators during task execution while having the ability to render virtual or remote environments. Therefore, the stability of such robots in physical human-robot-environment…
In material extrusion additive manufacturing, the extrusion process is commonly controlled in a feed-forward fashion. The amount of material to be extruded at each printing location is pre-computed by a planning software. This approach is…
Climbing soft robots are of tremendous interest in both science and engineering due to their potential applications in intelligent surveillance, inspection, maintenance, and detection under environments away from the ground. The challenge…
Untethered soft robots that locomote using electrothermally-responsive materials like shape memory alloy (SMA) face challenging design constraints for sensing actuator states. At the same time, modeling of actuator behaviors faces steep…
Aerial Manipulator Systems (AMS) have garnered significant interest for their utility in aerial operations. Nonetheless, challenges related to the manipulator's limited stiffness and the coupling disturbance with manipulator movement…
Soft robotics hold promise in the development of safe yet powered assistive wearable devices for infants. Key to this is the development of closed-loop controllers that can help regulate pneumatic pressure in the device's actuators in an…
Soft Robots distinguish themselves from traditional robots by embracing flexible kinematics. Because of their recent emergence, there exist numerous uncharted territories, including novel actuators, manufacturing processes, and advanced…
Foams are versatile by nature and ubiquitous in a wide range of applications, including padding, insulation, and acoustic dampening. Previous work established that foams 3D printed via Viscous Thread Printing (VTP) can in principle combine…
In recent years, the development of robots capable of operating in both aerial and aquatic environments has gained significant attention. This study presents the design and fabrication of a novel aerial-aquatic locomotion robot (AALR).…
Lower limb exoskeleton robots hold great potential for rehabilitation, movement assistance, and strength augmentation. Design control to guarantee optimal needed assistance is still a challenge considering the pathological variances between…
We present the development of a cable-based passive forearm exoskeleton that is designed to assist supination for hemiparetic stroke survivors. Our device uniquely provides torque sufficient for counteracting spasticity within a below-elbow…
Series Elastic Actuators provide many benefits in force control of robots in unconstrained environments. These benefits include high force fidelity, extremely low impedance, low friction, and good force control bandwidth. Series Elastic…
One of the many secrets to the success and prevalence of insects is their versatile, robust, and complex exoskeleton morphology. A fundamental challenge in insect-inspired robotics has been the fabrication of robotic exoskeletons that can…
Recently, the Less In More Out device, a fluidically actuated soft total artificial heart was proposed. This device uses arrays of pouch motors to achieve a positive fluidic lever when pneumatically actuated against physiological…
High-speed and high-acceleration movements are inherently hard to control. Applying learning to the control of such motions on anthropomorphic robot arms can improve the accuracy of the control but might damage the system. The inherent…
This study investigates the potential for drag-reduction of low-mechanical-order, self-adaptive control systems, consisting of hinged flaps attached along the edges of the rectangular base of a canonical blunt body. Comparative experiments…