Related papers: Adjoint-based optimal actuation for separated flow…
In this paper we present experimental and numerical reference data for a NACA 64A-110 airfoil at two angles of attack for $Ma=0.72$ and a Reynolds number of $Re_c=930.000$ with respect to the chord length. The test cases are designed to…
The aerodynamic performance of an isolated coaxial rotor in forward flight is analyzed by a high-fidelity computational fluid dynamics (CFD) approach. The analysis focuses on the high-speed forward flight with an advance ratio of 0.5 or…
In this work, deep reinforcement learning (DRL) is applied to active flow control (AFC) over a threedimensional SD7003 wing at a Reynolds number of Re = 60,000 and angle of attack of AoA = 14 degrees. In the uncontrolled baseline case, the…
Fully actuated omnidirectional UAVs enable independent control of forces and torques along all six degrees of freedom, broadening the operational envelope for agile flight and aerial interaction tasks. However, conventional control…
We assess the suitability of Reynolds-Averaged Navier-Stokes (RANS) simulation using the Spallart-Almaras (SA) turbulence model as a closure in analysing the performance of fluidic Active Flow Control (AFC) applications. In particular, we…
The present paper investigates high performance computing abilities of OpenFOAM for a low Reynolds number ($Re_D=2000$) axisymmetric jet subject to multiple zero net mass flux (ZNMF) actuators. First, parallel performance of OpenFOAM is…
This paper demonstrates a refined approach to solving dynamic optimization problems for underactuated marine surface vessels. To this end the differential flatness of a mathematical model assuming full actuation is exploited to derive an…
This study investigates the dynamics of passively morphing foils under accelerated plunging, establishing mechanistic links between transient kinematics, structural compliance, and aerodynamic performance. Two-way coupled simulations are…
Actuator line model has been widely employed in wind turbine simulations. However, the standard actuator line model does not include a model for the turbine nacelle which can significantly impact turbine wake characteristics as shown in the…
Axisymmetric direct numerical simulations are carried out to study the hydrodynamics of a laminar, stationary, incompressible, Newtonian, single-phase flow in an Annular Plane Couette (APC) channel. This configuration is that of a Straight…
This study investigates the effect of surface dimples on the unsteady aerodynamics of a National Advisory Committee for Aeronautics airfoil (NACA0012) at a chord-based Reynolds numbers of $Re_c = 5300$ and $10{,}000$ using direct numerical…
We develop neural-network active flow controllers using a deep learning PDE augmentation method (DPM). The sensitivities for optimization are computed using adjoints of the governing equations without restriction on the terms that may…
We present an experimental study of the aerodynamic forces on a thick and cambered airfoil at a high Reynolds number 3.6 x 10^6, which is of direct relevance for wind turbine design. Unlike thin airfoils at low chord-based Reynolds numbers,…
For present study, setting Strouhal Number (St) as control parameter, numerical simulations for flow past oscillating NACA-0012 airfoil at 1,000 Reynolds Numbers (Re) are performed. Temporal profiles of unsteady forces; lift and thrust, and…
Active many-body systems composed of many interacting degrees of freedom often operate out of equilibrium, giving rise to non-trivial emergent behaviors which can be functional in both evolved and engineered contexts. This naturally…
This study examines the effects of angle of attack on the characteristics of the laminar separation bubble (LSB), its associated low-frequency flow oscillation (LFO), and the flow-field around a NACA-0012 aerofoil at $Re_c = 5\times 10^4$…
This study investigates the reattachment of flow on a stalled NACA 0025 airfoil with an array of circular synthetic jet actuators. Experimental flow visualizations are used to assess the spanwise control authority of the array and the…
An approach to optimal actuator design based on shape and topology optimisation techniques is presented. For linear diffusion equations, two scenarios are considered. For the first one, best actuators are determined depending on a given…
Wind farm flow control aims to improve wind turbine performance by reducing aerodynamic wake interaction between turbines. Dynamic, physics-based models of wind farm flows have been essential for exploring control strategies such as wake…
Controlling the shape and position of moving and pinned droplets on a solid surface is an important feature often found in microfluidic applications. However, automating them, e.g., for high-throughput applications, does rarely involve…