Related papers: Time delay interferometry with minimal null freque…
The ongoing development of the space-based laser interferometer missions is aiming at unprecedented gravitational wave detections in the millihertz frequency band. The spaceborne nature of the experimental setups leads to a degree of…
Data from the Laser Interferometer Space Antenna (LISA) is expected to be dominated by frequency noise from its lasers. However the noise from any one laser appears more than once in the data and there are combinations of the data that are…
The proposed Laser Interferometer Space Antenna (LISA) mission is tasked with the detection and characterization of gravitational waves from various sources in the universe. This endeavor is challenged by transient displacement and…
This paper presents a novel method for laser frequency stabilisation in the Laser Interferometer Space Antenna (LISA) mission by locking a laser to two stable length references - the arms of the interferometer and an on-board optical…
The Taiji mission for space-based gravitational wave (GW) detection employs laser interferometry to measure picometer-scale distance variations induced by GWs. The tilt-to-length (TTL) coupling noise in the inter-spacecraft interferometers,…
Cancellation of laser frequency noise in interferometers is crucial for attaining the requisite sensitivity of the triangular 3-spacecraft LISA configuration. Raw laser noise is several orders of magnitude above the other noises and thus it…
We present first-order models for tilt-to-length (TTL) coupling in LISA, both for the individual interferometers as well as in the time-delay interferometry (TDI) Michelson observables. These models include the noise contributions from…
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase…
Accurate and efficient modeling of the Laser Interferometer Space Antenna (LISA) response is crucial for gravitational-wave (GW) data analysis. A key computational challenge lies in evaluating time-delay interferometry (TDI) variables,…
The sensitivity of LISA depends on the suppression of several noise sources; dominant one is laser frequency noise. It has been shown that the six Doppler data streams obtained from three space-crafts can be appropriately time delayed and…
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of…
An interferometer design that cancels all displacement noises of its test masses and maintains a gravitational-wave (GW) signal by combining multiple detector signals is called a displacement noise-free interferometer (DFI). The idea has…
We address the two issues raised by Bayle, Vallisneri, Babak, and Petiteau (in their gr-qc document arXiv:2106.03976) about our matrix formulation of Time-Delay Interferometry (TDI) (arXiv:2105.02054) \cite{TDJ21}. In so doing we explain…
Heterodyne interferometry for precision science often comes with an optical phase modulation, for example, for intersatellite clock noise transfer for gravitational wave (GW) detectors in space, exemplified by the Laser Interferometer Space…
We explore the impact of choosing different sets of Time-Delay Interferometry (TDI) variables for detecting and reconstructing Stochastic Gravitational Wave Background (SGWB) signals and estimating the instrumental noise in LISA. Most works…
In early 2024, ESA formally adopted the Laser Interferometer Space Antenna (LISA) space mission with the aim of measuring gravitational waves emitted in the millihertz range. The constellation employs three spacecraft that exchange laser…
The Laser Interferometer Space Antenna (LISA) is a future space-based gravitational wave (GW) detector designed to be sensitive to sources radiating in the low frequency regime (0.1 mHz to 1 Hz). LISA's interferometer signals will be…
Tilts of certain elements within a laser interferometer can undesirably couple into measurements as a form of noise, known as tilt-to-length (TTL) coupling. This TTL coupling is anticipated to be one of the primary noise sources in the…
Space-borne gravitational-wave telescopes are key to extend the observation band below $10\,\mathrm{Hz}$. The use of inter-satellite optical cavities linked by heterodyne interferometry is a promising approach to reach the sensitivity level…
The Laser Interferometer Space Antenna (LISA) will be the first space-based gravitational wave (GW) observatory. It will measure gravitational wave signals in the frequency regime from 0.1 mHz to 1 Hz. The success of these measurements will…