Related papers: Turbulent flows over porous and rough substrates
This paper extends the resolvent formulation proposed by McKeon & Sharma (2010) to consider turbulence-compliant wall interactions. Under this formulation, the turbulent velocity field is expressed as a linear superposition of propagating…
We study the experimental properties of exchange flows in a stratified inclined duct (SID), which are simultaneously turbulent, strongly stratified by a mean vertical density gradient, driven by a mean vertical shear, and continuously…
A mathematical model that governs turbulent flows through permeable media is considered in this work. The model under consideration is based on a double-averaging concept which in turn is described by the time-averaging technique…
This paper reports turbulent boundary layer measurements made over open-cell reticulated foams with varying pore size and thickness, but constant porosity ($\epsilon \approx 0.97$). The foams were flush-mounted into a cutout on a flat…
Direct Numerical Simulations (DNS) of turbulent channel flow at a shear Reynolds number of $Re_{*}=360$ for Newtonian and Herschel-Bulkley fluids in smooth and rough channels has been performed. The rough surface was made of irregular…
Direct numerical simulations (DNS) are performed for two wall-bounded flow configurations: laminar Couette flow at $Re=740$ and turbulent channel flow at $Re_{\tau}=180$, where $\tau$ is the shear stress at the wall. The top wall is smooth…
A neutral boundary layer was generated in the laboratory to analyze the mean velocity field and the turbulence field within and above an array of two-dimensional obstacles simulating an urban canopy. Different geometrical configurations…
This study compares turbulent channel flows over elastic walls with those over rough walls, to explore the role of the dynamic change of shape of the wall on turbulence. The comparison is made meaningful by generating rough walls from…
Surface roughness significantly impacts transition to turbulence, especially over high-speed, blunt geometries where surface ablation is necessary to mitigate heat loads during atmospheric entry. Inspired by sand-grain roughness experiments…
In this study, we develop computational models and methodology for accurate multi-component-flow simulation in under-resolved multi-scale porous structures. It is generally impractical to fully resolve the flow in porous structures with…
Knowledge of turbulent flows over non-flat surfaces is of major practical interest in diverse applications. Significant work continues to be reported in the roughness regime at high Reynolds numbers where the cumulative effect of surface…
The turbulent/non-turbulent interface is analysed in a direct numerical simulation of a boundary layer in the range $Re_\theta=2800-6600$, with emphasis on the behaviour of the relatively large-scale fractal intermittent region. This…
Direct numerical simulations of turbulent channels with rough walls are conducted in the transitionally rough regime. The effect that roughness produces on the overlying turbulence is studied using a modified triple decomposition of the…
This study utilizes Large Eddy Simulation (LES) to investigate the impact of longitudinal triangular riblets on the laminar-to-turbulent transition in boundary layer flow. Five cases are examined: one involving a flat plate and four with…
The interaction between near-wall turbulence and wall curvature is described for the incompressible flow in a plane channel with a small concave-convex-concave bump on the bottom wall, with height comparable to the wall-normal location of…
Turbulent flows above a solid surface are characterised by a hydrodynamic roughness that represents, for the far velocity field, the typical length scale at which momentum mixing occurs close to the surface. Here, we are theoretically…
Transition to turbulence dramatically alters the properties of fluid flows. In most canonical shear flows, the laminar flow is linearly stable and a finite-amplitude perturbation is necessary to trigger transition. Controlling transition to…
We analyze particle velocity fluctuations in a simulated granular system subjected to homogeneous quasistatic shearing. We show that these fluctuations share the following scaling characteristics of fluid turbulence in spite of their…
In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers, whose disruptive design will depend on predictive numerical simulations. Typical AM rough surfaces show limited resemblance to…
The flow above idealized, two-dimensional series of parallelepipedal buildings is examined with the aim of investigating how the building width to height aspect ratio affects the turbulence in the roughness sublayer and the ventilation of…