Related papers: Impact of Nanometer-Thin Stiff Layer on Adhesion t…
Understanding the adhesion between graphene and other materials is crucial for achieving more reliable graphene-based applications in electronic devices and nanocomposites. The ultra-thin profile of graphene, however, poses significant…
When two solids are squeezed together they will in general not make atomic contact everywhere within the nominal (or apparent) contact area. This fact has huge practical implications and must be considered in many technological…
We poorly understand the properties of amorphous systems at small length scales, where a continuous elastic description breaks down. This is apparent when one considers their vibrational and transport properties, or the way forces propagate…
A set of Mo/Si periodic multilayers is studied by non destructive analysis methods. The thickness of the Si layers is 5 nm while the thickness of the Mo layers changes from one multilayer to another, from 2 to 4 nm. This enables us to probe…
We carry out molecular statics (MS) simulations to study the indentation process of Pt (111) surfaces using an indenter with the radius of 5-20 nm. The substrate and indenter surfaces are either bare or graphene-covered. Our simulations…
Diamond-based coatings are employed in several technological applications, for their outstanding mechanical properties, biocompatibility, and chemical stability. Of significant relevance is the interface with silicon oxide, where phenomena…
The dependence of the structure of a phospholipid layer (DSPC and SOPC) adsorbed on a hydrosol substrate on the concentration of NaOH in a solution of 5-nm silica particles has been studied by X-ray reflectrometry with the use of…
Fusion of lipid bilayers in membranes is important in processes from vesicle-cell interactions (as in drug delivery) to exosome-cell signaling, while transient transmembrane electric fields are known to occur spontaneously. Two contacting…
Cellulose, as a naturally abundant and biocompatible material, is still gaining interest due to its high potential for functionalization. This makes cellulose a promising candidate for replacing plastics. Understanding how cellulose…
A series of poly(methyl methacrylate) (PMMA) surfaces decorated by Cu nanoparticles (NP) with gradually varied morphology were prepared by high-pressure CO2 treatment at various time spans. Combining the characterizations of transmission…
4D printing of flat sheets that self-fold into architected 3D structures is a powerful origami-inspired approach for the fabrication of multi-functional devices and metamaterials. The possibility to endow the initially flat sheet with a…
Friction is a ubiquitous phenomenon that greatly affects our everyday lives and is responsible for large amounts of energy loss in industrialised societies. Layered materials such as graphene have interesting frictional properties and are…
We study the adhesive contact between elastic solids with randomly rough, self affine fractal surfaces. We present molecular dynamics (MD) simulation results for the interfacial stress distribution and the wall-wall separation. We compare…
We report molecular dynamics simulation results on the equilibrium properties of polymer thin films adsorbed onto flat and curved substrates. We first systematically determine the contact angle of polymer droplets on flat substrates as a…
Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D…
Frictional losses are responsible for significant energy waste in many practical applications, and superlubricity with a coefficient of friction lower than 0.01 is the goal of tribologists. In this paper, metal-on-polymer contact was…
We investigate nanoscale friction in [LaMnO3]m/[SrMnO3]n superlattice films using lateral force microscopy, focusing on the effects of fluorine doping and top-layer thickness. For all samples, friction forces scale linearly with the sum of…
The debonding criterion of fibrils of soft adhesive materials is a key element regarding the quantitative modelisation of pressure sensitive adhesive tapes peeling energy. We present in this article an experimental study of the detachment…
The design of hybrid peptide-solid interfaces for nanotechnological applications such as biomolecular nanoarrays requires a deep understanding of the basic mechanisms of peptide binding and assembly at solid substrates. Here we show by…
There are three regimes of cell membrane interaction with glass - Tight and loose adhesion, separated by repulsion. Explicitly including hydration, this paper evaluates the pressure between the surfaces as functions of distance for…