Related papers: A Modified T-Mixer Simulation, Fabrication, and Ch…
Experiments of water wicking in 1D silicon-dioxide nanochannels of heights 59 nm, 87 nm, 124 nm and 1015 nm are used to estimate the disjoining pressure of water which was found to be as high as ~1.5 MPa while exponentially decreasing with…
We study compressible fluid flow in narrow two-dimensional channels using a novel molecular dynamics simulation method. In the simulation area, an upstream source is maintained at constant density and temperature while a downstream…
Due to their nature, using shear thickening fluids (STFs) in engineering applications has sparked an interest in developing energy-dissipating systems, such as damping devices or shock absorbers. The Rheinforce technology allows the design…
The liquid flow and conjugated heat transfer performance of single-phase laminar flow in rectangular microchannels equipped with longitudinal vortex generators (LVGs) are numerically investigated. Deionized-water with temperature-dependent…
Recent numerical analyses to optimize the design of microfluidic devices for more effective entrapment or segregation of surrogate circulating tumor cells (CTCs) from healthy cells have been reported in the literature without concurrently…
Inhomogeneous uid mixing in a tilted-rotating cylindrical tank (radius a = 3:5 cm) is shown at Re(17-40) and low capillary numbers. A water and surfactant solu- tion (1% by mass sodium oleate) is dispersed in soybean oil (95% by volume),…
The present study presents a simple but effective method for 3D visualization of the two-phase flow in the micro-tube. An isosceles right-angle prism combined with a mirror located 45^o bevel to the prism is employed to obtain synchronously…
Flow measurement in partially filled pipes presents greater complexity compared to fully filled systems, primarily due to the complex velocity distribution within the cross-section, which is a key source of measurement inaccuracy. To…
Efficient and sustainable techniques for separating water-methanol mixtures are in high demand in the industry. Recent studies have revealed that membranes and 2D materials could achieve such separation. In our research, we explore the…
Microfluidic channels are integral to biomedical technology and process engineering, offering versatility in handling fluids with complex properties, often a combination of viscous and elastic attributes. Despite significant advancements in…
We investigate a two-dimensional network simulator that model the dynamics of two-phase immiscible bulk flow where film flow can be neglected. We present a method for simulating the detailed dynamical process where the two phases are…
Ferrofluids kept in place by permanent magnet quadrupoles can act as liquid walls to surround a second non-magnetic inside, resulting in a liquid fluidic channel with diameter size ranging from mm down to less than 10 micrometer. Micro…
Background: Computational fluid dynamics (CFD) has become an essential design tool for ventricular assist devices (VADs), where the goal of maximizing performance often conflicts with biocompatibility. This tradeoff becomes even more…
Microfluidics is an established multidisciplinary research domain with widespread applications in the fields of medicine, biotechnology and engineering. Conventional production methods of microfluidic chips have been limited to planar…
In this paper, we describe a mathematical model and a numerical simulation method for the condenser component of a novel two-phase thermosyphon cooling system for power electronics applications. The condenser consists of a set of…
We present SplitMixer, a simple and lightweight isotropic MLP-like architecture, for visual recognition. It contains two types of interleaving convolutional operations to mix information across spatial locations (spatial mixing) and…
MFC is an open-source tool for solving multi-component, multi-phase, and bubbly compressible flows. It is capable of efficiently solving a wide range of flows, including droplet atomization, shock-bubble interaction, and gas bubble…
Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and…
Mixing in an active micromixer was achieved using Lorentz force-assisted actuation of an enameled copper wire. A single-step template-assisted soft lithography technique was used to construct the mixing chamber. The chamber had a volume of…
We demonstrate the design, fabrication and use of a dual electrode PMUT (Piezoelectric Micromachined Ultrasound Transducer) integrated with a microfluidic channel as a fluid density sensor in both static and dynamic density-change…