Related papers: Efficient timing jitter simulation for passively m…
X-ray free-electron lasers (XFELs) are powerful tools to explore and study nature for achieving remarkable advances. Generally, seeded FELs are ideal sources for supplying full coherent soft x-ray pulses. Benefiting from the high-frequency…
We report detailed measurements of the pump-current dependency of the self-pulsating frequency of semiconductor CD lasers. A distinct kink in this dependence is found and explained using rate-equation model. The kink denotes a transition…
High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its…
Phase clocks are synchronization tools that implement a form of logical time in distributed systems. For systems tolerating transient faults by self-repair of damaged data, phase clocks can enable reasoning about the progress of distributed…
Combination of two basic types of synchronization, anticipated and isochronous synchronization, is investigated numerically in coupled semiconductor lasers. Due to the combination, a synchronization of good quality can be obtained. We study…
Coupled clocks are a classic example of a synchronization system leading to periodic collective oscillations. This phenomenon already attracted the attention of Christian Huygens back in 1665,who described it as a kind of "sympathy" among…
The synchronized excitable behavior of two coupled chaotic diode lasers with feedback was experimental and numerically studied. We determine the relation between the observed delay times in synchronized Low Frequency Fluctuation spikes and…
Variational algorithms may enable classically intractable simulations on near-future quantum computers. However, their potential is limited by hardware errors. It is therefore crucial to develop efficient ways to mitigate these errors.…
In this study we explore the optimization of laser pulse duration to obtain the shortest possible pulse. We do this by employing a feedback loop between a pulse shaper and pulse duration measurements. We apply to this problem several…
The optimal allocation of replicas to a homogeneous or heterogenous set of processors is derived for parallel tempering simulations on multi-processor machines. In the general case, it is possible without substantially increasing wall clock…
We synchronize a 8.06-GHz microwave signal from a voltage-controlled oscillator with an optical pulse train from a 77.5- MHz mode-locked Er-fiber laser using a fiber-based optical-microwave phase detector. The residual phase noise between…
It is well known that timing jitter can degrade the bit error rate (BER) of receivers that recover the clock from input data. However, timing jitter can also result in an indefinite increase in the settling time of clock recovery circuits,…
We demonstrate passive harmonic mode-locking of a quantum well laser diode designed to support a discrete comb of Fabry-Perot modes. Spectral filtering of the mode spectrum was achieved using a non-periodic patterning of the cavity…
RF pulse compressor is a device to convert a long RF pulse to a short one with much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor used in large scale linear accelerators. It is widely studied around the…
We demonstrate harmonic mode-locking in a semiconductor VCSEL using polarization-controlled delayed feedback. By integrating a rotatable $\lambda$/2-plate within an external cavity, we achieve precise control over pulse multiplicity and…
A method is presented for tracing the locus of a specific peak in the frequency response under variation of a parameter. It is applicable to periodic, steady-state vibrations of harmonically forced nonlinear mechanical systems. It operates…
We present the first statistical mechanics study of a passively mode locked laser which includes all the main physical processes, saturable absorption, Kerr nonlinearity, parabolic gain filtering and group velocity dispersion, assuming the…
Ultrashort pulsed lasers, operating through the phenomenon of mode-locking, have played a significant role in many facets of our society for 50 years, for example in the way we exchange information, measure and diagnose diseases, process…
In ultra-fast multi-mode lasers, mode-locking is implemented by means of ad hoc devices, like saturable absorbers or modulators, allowing for very short pulses. This comes about because of nonlinear interactions induced among modes at…
For many applications of pulsed radiation, the time-history of the radiation intensity must be optimized to induce a desired time-history of conditions. This optimization is normally performed using multi-physics simulations of the system.…