Related papers: Order Estimation of Linear-Phase FIR Filters for D…
Time-domain chromatic dispersion (CD) equalization using finite impulse response (FIR) filter is now a common approach for coherent optical fiber communication systems. The complex weights of FIR filter taps are calculated from a truncated…
The bandwidth of the sampling systems, especially for time-interleaved analog-to-digital converters, needs to be extended along with the rapid increase of the sampling rate. A digitally assisted technique becomes a feasible approach to…
This paper considers the reconstruction of digital complex baseband signals from M-periodically nonuniformly sampled real bandpass signals. With such a sampling, bandpass signals with arbitrary frequency locations can be sampled and…
A simple procedure for the design of recursive digital filters with an infinite impulse response (IIR) and non-recursive digital filters with a finite impulse response (FIR) is described. The fixed-lag smoothing filters are designed to…
A digital finite impulse response (FIR) filter design is fully synthesizable, thanks to the mature CAD support of digital circuitry. On the contrary, analog mixed-signal (AMS) filter design is mostly a manual process, including architecture…
FIR filters are used in many performance/power critical applications such as mobile communication devices, analogue to digital converters and digital signal processing applications. Design of appropriate FIR filters usually causes the order…
The Parks-McClellan algorithm provides an efficient method for designing a linear phase FIR filter with a pre-specified weight function on the approximation error. For the given filter order and the specified weight function, the filter…
Contemporary field-programmable gate arrays (FPGAs) are predestined for the application of finite impulse response (FIR) filters. Their embedded digital signal processing (DSP) blocks for multiply-accumulate operations enable efficient…
Any communication channel will usually distort the transmitted signal. This is especially true in the case of mobile systems, where multipath propagation causes the received signal to be seriously degraded. Over the years, many techniques…
Many signal processing applications require digital filters with variable frequency characteristics, especially the filters with variable bandwidth. Due to their linear phase and inherent stability, variable bandwidth finite impulse…
Complexity of linear finite-impulse-response (FIR) equalizers is proportional to the square of the number of nonzero taps in the filter. This makes equalization of channels with long impulse responses using either zero-forcing or minimum…
In a high-speed coherent optical transmission system, typically the signals obtained at the receiver front-end are digitized using very high-speed ADCs and then processed in the digital domain to remove optical channel impairments. In this…
FIR (finite impulse response) digital filter design is a fundamental problem in signal processing. In particular, FIR approximation of analog filters (or systems) is ubiquitous not only in signal processing but also in digital…
Digital filters with variable bandwidth can be used for a variety of applications. Arbitrary change in the bandwidth of a digital Finite Impulse Response (FIR) filter can be acquired using sampling rate converters. In this paper, a sampling…
This paper describes a new all-digital technique for calibration of the mismatches in time-interleaved analog-to-digital converters (TIADCs) to reduce the circuit area. The proposed technique gives the first order approximation of the gain…
The use of asynchronous design approaches to construct digital signal processing (DSP) systems is a rapidly growing research area driven by a wide range of emerging energy constrained applications such as wireless sensor network, portable…
In modern digital filter chip design, efficient resource utilization is a hot topic. Due to the linear phase characteristics of FIR filters, a pulsed fully parallel structure can be applied to address the problem. To further reduce hardware…
Finite impulse response (FIR) graph filters play a crucial role in the field of signal processing on graphs. However, when the graph signal is time-varying, the state of the art FIR graph filters do not capture the time variations of the…
The focus of this paper is the estimation of a delay between two signals. Such a problem is common in signal processing and particularly challenging when the delay is non-stationary in nature. Our proposed solution is based on an all-pass…
In this article we consider two problems: FIR (Finite Impulse Response) approximation of IIR (Infinite Impulse Response) filters and inverse FIR filtering of FIR or IIR filters. By means of Kalman-Yakubovich-Popov (KYP) lemma and its…