Related papers: Precise and Fast LIDAR via Electrical Asynchronous…
Light Detection and Ranging (LiDAR) technology in consumer-grade mobile devices can be used as a replacement for traditional background removal and compositing techniques. Unlike approaches such as chroma keying and trained AI models,…
Single cavity dual-comb fiber lasers adopting different multiplexing configurations are benefited from the natures of common-mode noise suppression and superior coherence. Particularly, repetition-rate tunable dual-combs enable…
High speed, high-resolution, and accurate 3D scanning would open doors to many new applications in graphics, robotics, science, and medicine by enabling the accurate scanning of deformable objects during interactions. Past attempts to use…
Laser triangulation sensors are widely used in industry for surface inspection due to simple setup, micron precision and low cost. Conventional laser triangulation methods only enable axial distance measurement limiting further…
A misalignment of LiDAR as low as a few degrees could cause a significant error in obstacle detection and mapping that could cause safety and quality issues. In this paper, an accurate inspection system is proposed for estimating a LiDAR…
This paper presents a Light Detection and Ranging (LiDAR) data set that targets complex urban environments. Urban environments with high-rise buildings and congested traffic pose a significant challenge for many robotics applications. The…
We report results on ranging based on frequency shifted feedback (FSF) lasers with two different implementations: (1) An Ytterbium-fiber system for measurements in an industrial environment with accuracy of the order of 1 $\mu$m, achievable…
Lidars are depth measuring sensors widely used in autonomous driving and augmented reality. However, the large volume of data produced by lidars can lead to high costs in data storage and transmission. While lidar data can be represented as…
Synchronising ultra-short (~fs) and focussed laser pulses is a particularly difficult task, as this timescale lies orders of magnitude below the typical range of fast electronic devices. Here we present an optical technique that allows for…
LiDARs are widely used for 3D depth reconstruction, but their performance is often limited by inherent hardware constraints that impose trade-offs between range, spatial resolution, and frame rate. Many LiDAR systems typically operate at…
Single-photon light detection and ranging (LiDAR), offering single-photon sensitivity and picosecond time resolution, has been widely adopted for active imaging applications. Long-range active imaging is a great challenge, because the…
Light detection and ranging (lidar) has long been used in various applications. Solid-state beam steering mechanisms are needed for robust lidar systems. Here we propose and demonstrate a lidar scheme called "Swept Source Lidar" that allows…
Deep stereo matching has made significant progress in recent years. However, state-of-the-art methods are based on expensive 4D cost volume, which limits their use in real-world applications. To address this issue, 3D correlation maps and…
Robust and accurate localization and mapping of an environment using laser scanners, so-called LiDAR SLAM, is essential to many robotic applications. Early 3D LiDAR SLAM methods often exploited additional information from IMU or GNSS…
We propose a lifelong 3D mapping framework that is modular, cloud-native by design and more importantly, works for both hand-held and robot-mounted 3D LiDAR mapping systems. Our proposed framework comprises of dynamic point removal,…
Consistent maps are key for most autonomous mobile robots, and they often use SLAM approaches to build such maps. Loop closures via place recognition help to maintain accurate pose estimates by mitigating global drift, and are thus key for…
The serrodyne principle enables shifting the frequency of an electromagnetic signal by applying a linear phase ramp in the time domain [1]. This phenomenon has been exploited to frequency-shift signals in the radiofrequency (RF), microwave…
Recently, there has been growing interest and effort in developing high-speed high-precision 3D imaging technologies for a wide range of industrial, automotive and biomedical applications. Optical frequency-modulated continuous wave (FMCW)…
Mapping the environment has been an important task for robot navigation and Simultaneous Localization And Mapping (SLAM). LIDAR provides a fast and accurate 3D point cloud map of the environment which helps in map building. However,…
We report a high-energy, bidirectional, dissipative soliton mode-locked fiber laser operating in the 1550 nm normal-dispersion regime. By leveraging intracavity dispersion management and a Lyot filtering mechanism, the laser achieves…