Related papers: Comparative study on high temperature mechanical b…
Monolithic 3YTZP and 3YTZP containing 2.5 vol.% of single-walled carbon nanotubes (SWCNT) were fabricated by Spark Plasma Sintering (SPS) at 1250 C. Microstructural characterization of the as-fabricated 3YTZP/SWCNTs composite shows a…
Single-walled carbon nanotubes (SWNTs) have many interesting properties; they may be metallic or semiconducting depending on their diameter and helicity of the graphene sheet. Hydrostatic or quasi-hydrostatic high pressures can probe many…
Structural and thermal characteristics of crystalline ropes of single-wall carbon nanotubes (SWCNTs) are investigated. Novel crystalline ropes of polygonized SWCNTs produced by laser irradiation exhibit rounded-hexagonal cross sections in…
Temperature dependence of electrical resistance of single-walled carbon nanotube (SWCNTs)/epoxy nanocomposites, which is characterized by a temperature coefficient of resistance (TCR), is experimentally investigated. In the existing…
This paper examines the effect of temperature on the structural stability and mechanical properties of 20 layered (10,10) single walled carbon nanotubes (SWCNTs) under tensile loading using an O(N) tight binding molecular dynamics (TBMD)…
This study explores the mixed convection of carbon nanotube (CNT)-water nanofluid within a square cavity containing heated cylinders under the influence of a magnetic field, focusing on three geometric configurations: a single heated…
Self-assembled hierarchical solid surfaces are very interesting for wetting phenomena, as observed in a variety of natural and artificial surfaces. Here, we report single-walled (SWCNT) and multi-walled carbon nanotube (MWCNT) thin films…
The structures and symmetries of single-walled carbon nanotubes (SWNTs) are introduced in detail. The physical properties of SWNTs induced by their symmetries can be described by tensors in mathematical point of view. It is found that there…
In this dissertation, thermal and electrical properties of aligned multiwall carbon nanotubes (MWNTs) prepared by thermal decomposition of hydrocarbons have been experimentally studied. The thesis consists of six chapters. Ch1 is an…
High strain rate experiments performed on multi-walled carbon nanotubes and polycarbonate composites (MWCNT-PC) have exhibited enhanced impact resistance under a dynamic strain rate of nearly 2500/s with composition of only 0.5 to 2.0…
Recently unusual properties of water in single-walled carbon nanotubes (CNT) with diameters ranging from 1.05 nm to 1.52 nm were observed. It was found that water in the CNT remains in an ice-like phase even when the temperature ranges…
Single-wall carbon nanotubes (SWNTs) were used to augment the thermal transport properties of industrial epoxy. Samples loaded with 1 wt% unpurified SWNT material show a 70% increase in thermal conductivity at 40K, rising to 125% at room…
PMMA and Poly carbonate (PC) are wonderful low cost materials which can be easily tailored and shaped. However they have poor mechanical, thermal and electrical properties which are required to be enhanced in several applications where…
The current research establishes magnetohydrodynamics (MHD) boundary layer flow with heat and mass transfer of a nanofluid over an exponentially extending sheet embedded in a porous medium. During this exploration, nanoparticles,…
Structure transformation by heat treatment in single-walled carbon nanotubes (SWCNT) is investigated using molecular dynamics simulation. The critical temperature for the collapse of pure SWCNT is as high as 4655 K due to strong covalent…
Physisorption studies and transmission electron microscopy have been used to characterise multi-walled carbon nanotubes (MWNTs) made by a template-synthesis technique. Microscopic investigations revealed formation of 'branched nanotubes'…
The electronic states in isolated single-wall carbon nanotubes (SWCNTs) have been considered as an ideal realization of a Tomonaga-Luttinger liquid (TLL). However, it remains unclear whether one-dimensional correlated states are realized…
Order(N) Tight-Binding Molecular Dynamics (TBMD) simulations are performed to investigate the thermal stability of (10,10) metallic Single-Walled Carbon Nanotubes (SWCNT). Periodic boundary conditions (PBC) are applied in axial direction.…
Heat conduction of single-walled carbon nanotubes (SWNTs) isotope-superlattice is investigated by means of classical molecular dynamics simulations. Superlattice structures were formed by alternately connecting SWNTs with different masses.…
The influence of a modifier based on multi walled carbon nanotubes (MWCNT) is investigated using C11000 copper alloy. The influence of the modifier addition into the melt was investigated using tensile test, hardness measurements, X-ray…