Related papers: Optimal standoff distance for a highly focused mic…
Illuminating a water solution with a focused continuous wave laser produces a strong local heating of the liquid that leads to the nucleation of bubbles, also known as thermocavitation. During the growth of the bubble, the surrounding…
This work marks the third in a series of experiments that were in a semi-circular, gas-fluidized bed with side jets. In this work, the particles are 1 mm ceramic beads. The bed is operated just at and slightly above and below the minimum…
We investigate ambient fluid entrainment and near-field flow characteristics of a free surface plunging jet for five Reynolds numbers ranging from 3000 to 10000 using time-resolved stereo particle image velocimetry (SPIV). We present…
Supersonic jet noise reduction is important for high speed military aircraft. Lower acoustic levels would reduce structural fatigue leading to longer lifetime of the jet aircraft. It is not solely structural aspects which are of importance,…
The penetration of projectiles into granular materials has been mainly studied using spherical intruders. Here we explore the dynamics of rods penetrating vertically in a two-dimensional granular bed composed of expanded polystyrene…
Combustion in automotive and aerospace applications employing diesel, gas turbine and liquid rocket engines is preceded by injection and mixing of fuel and oxidizer at high pressures, often exceeding mixture critical values. Experimental…
The penetration of a fast projectile into a resistant medium is a complex process that is suitable for simple modeling, in which basic physical principles can be profitably employed. This study connects two different domains: the fast…
This study experimentally and numerically investigates the dynamics of a high-speed liquid jet generated from the interaction of two tandem cavitation bubbles, termed bubble 1 and bubble 2, depending on their generation sequence. In our…
Direct numerical simulations of free round jets at a Reynolds number ($Re_{D}$) of $5000$, based on jet diameter ($D$) and jet-exit bulk velocity ($U_{e}$), are performed to study jet turbulence characteristics at supercritical pressures.…
We investigate the phenomenon of air entrainment in turbulent water jets exiting a pool near the free surface. Our experimental results reveal that bubble entrainment occurs only within a specific region close to the point where the jet…
A full characterization of the water flow past a silicon superhydrophobic surface with longitudinal micro-grooves enclosed in a microfluidic device is presented. Fluorescence microscopy images of the flow seeded with fluorescent passive…
We propose a two-phase-fluid model for a full-cone turbulent round jet that describes its dynamics in a simple but comprehensive manner with only the apex angle of the cone being a disposable parameter. The basic assumptions are that (i)…
By focusing a laser pulse inside a capillary partially filled with liquid, a vapour bubble is created which emits a pressure wave. This pressure wave travels through the liquid and creates a fast, focused axisymmetric microjet when it is…
A liquid metal flow in the form of a submerged round jet entering a square duct in the presence of a transverse magnetic field is studied experimentally. A range of high Reynolds and Hartmann numbers is considered. Flow velocity is measured…
The present study aims to investigate the role of injector geometry, particularly injector tube length to diameter ratio (L/D) in liquid jet stability and breakup in presence of crossflow. Water is injected into a crossflow of air.…
The present work examines the effect of the velocity profile on primary breakup of liquid jets emanating from fuel injectors. Direct Numerical Simulation (DNS) is used to simulate liquid jet breakup. Different velocity profiles are imposed…
The stability of high-end piezo-acoustic drop-on-demand (DOD) inkjet printing is sometimes compromised by the entrainment of an air bubble inside the ink channel. Here, bubble pinch-off from an acoustically driven meniscus is studied in an…
Underexpanded jets are present in various engineering applications; in recent years, they have gained special attention because of the development of gas-fueled propulsion systems. In these apparatuses, the direct injection of fuels such as…
We present experimental measurements of penetration depths for the impact of spheres into wetted granular media. We observe that the penetration depth in the liquid saturated case scales with projectile density, size, and drop height in a…
We investigate the collision of a continuous liquid jet with a regular stream of immiscible droplets. The immiscible liquids, namely silicon oil for the continuous jet and an aqueous glycerol solution for the drop stream, are selected to…