Related papers: High temperature internal friction in a Ti-46Al-1M…
Creep deformation behaviour in single phase $\gamma$-TiAl alloy has been an extensively studied topic since the late 1970s. A lot of literatures have reported creep behaviour of $\gamma$-TiAl alloys, manufactured using different processing…
The contribution to the low frequency internal friction and the thermal conductivity due to optically vibrating edge dislocation dipoles is calculated within the modified Granato-Lucke string model. The results are compared with the recent…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre…
In novel Co and CoNi based superalloys, the creep resistance is limited at high temperatures due to low lattice misfit and solvus temperature. In this study, we combined the advantages of Co-Ti (high lattice misfit and solvus temperature)…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence…
Aluminosilicate (Al-Si-O) thin films containing up to 31 at. % Al and 23 at. % Si were prepared by reactive RF magnetron co-sputtering. Mechanical and structural properties were measured by indentation and specular reflectance infrared…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
This work reports superconductivity studies in the intermetallic Ti$_{0.85}$Pd$_{0.15}$ performed in normal conditions and under hydrostatic pressure. The crystal structure of the compound has a body centered cubic at room temperature and…
We report a study of the temperature and stress dependence of the friction associated with a relative motion of two masses of solid $^4$He in contact. The situation where "two masses" coupled only by friction exists emerges spontaneously…
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
A new method of combined loading was developed for manufacturing large - scale ingot of alpha-beta titanium alloy Ti-6Al-4V with the diameter of the gauge 120 mm and the length 300 mm. The process includes torsion with simultaneous tensile…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
Microstructural features and mechanical properties of an Al-Mg-Si alloy processed by high-pressure torsion have been investigated using transmission electron microscopy, X-ray diffraction, three-dimensional atom probe, tensile tests and…
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured…
Molybdenum disilicide (MoSi$_2$) is a very promising material for high temperature structural applications due to its high melting point (2030 {\deg}C), low density, high thermal conductivity and good oxidation resistance. However, MoSi$_2$…