Related papers: Structural and optical characterization of NiO pol…

Nickel oxide (NiO) is a binary compound with a lot of applications in the present technology. NiO thin films were deposited by reactive sputtering magnetron under several voltage biases applied in the glass substrates (0, 50, 100, 200, 300,…

Cu-doped NiO thin films were deposited on ITO substrates via spray pyrolysis at 450 {\deg}C for 1.5 minutes. XRD confirmed a cubic NiO structure, with Cu incorporation reducing crystallite size, increasing interplanar spacing, and expanding…

Bismuth and Nickel transparent oxides thin films were grown on glass and flexible polythelene terephalate (PET) substrates by DC sputtering technique at room temperature 300 K. The structures of Bi2O3 and NiO films were analyzed by X-ray…

Thin films of the prototypical charge transfer insulator NiO appear to be a promising material for novel nanoelectronic devices. The fabrication of the material is challenging however, and mostly a p-type semiconducting phase is reported.…

Nickel oxide (NiO) has been studied extensively for various applications ranging from electrochemistry to solar cells [1,2]. In recent years, NiO attracted much attention as an antiferromagnetic (AF) insulator material for spintronic…

The authors have shown that nanogranular indium tin oxide (ITO) films, deposited by spray pyrolysis on silicon substrate, demonstrate ultralow thermal conductivity ~ 0.84 +/-0.12 Wm-1K-1 at room temperature. This value is approximately by…

NiO is a promising p-type material for photovoltaics and power electronics, but its temperature limits remain unclear. Using in situ high-temperature X-ray diffraction (HT-XRD) from 30 to 1100 C, we track the structural evolution of NiO…

Nanocrystalline textured EuO thin films are prepared by an oxygen loss process from a pure Eu2O3 bulk ceramic target through pulsed laser deposition in vacuum at room temperature. X-ray diffraction spectra evidence a well-defined…

Ion-beam sputtering offers significant benefits in terms of deposition uniformity and pinhole-free thin-films without limiting the scalability of the process. In this work, the reactive ion-beam sputtering of nickel oxide has been developed…

We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on…

The Fe-doped CuO thin films were deposited onto glass substrates by Spray pyrolysis technique. The structural, micro-structural, optical and electrical properties of the synthesized samples were investigated in details. The X-Ray…

The effect of sputtering power ($P$=60 W-180 W) on the electrochromic properties of nickel oxide films deposited on ITO-coated glass substrates by the RF magnetron sputtering technique was investigated. Crystalline structure and morphology…

The free standing solid polymer nanocomposite films has been prepared through standard solution cast technique. The improvement in structural, microstructural and electrochemical properties has been observed on the dispersion of nanofiller…

In this work thin films of the La1-xSrxCoO3 (0.05 < x < 0.26) compound were grown, employing the so-called spray pyrolysis process. The as-grown thin films exhibit polycrystalline microstructure, with uniform grain size distribution, and…

Crystalline Fe3O4/NiO bilayers were grown on MgO(001) substrates using reactive molecular beam epitaxy to investigate their structural properties and their morphology. The film thickness either of the Fe3O4 film or of the NiO film has been…

In the present work, ultrathin films of Zinc oxide (ZnO) and Aluminum doped zinc oxide (AZO) with 20 nm thick were fabricated at 300 K on glass and Polyethylene terephthalate (PET) substrates by means of directcurrent sputtering method. The…

Bacterial infections are a common problem in daily life that can affect human health. Researchers are looking for valuable materials that can help prevent such infections and environmental pollutants. Thin films are a well-known application…

Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…

Thin films of uniformly distributed Fe2O3 nanoparticles have been prepared on single crystal silicon and glass substrates by a spray pyrolysis technique in a single step using a mixture of water and ferrocene dissolved in xylene. The size…

We present results on the development of nanocomposite NiO:Au thin-film hydrogen sensors, which are able to detect hydrogen concentrations as low as 2 ppm in air, operating at low temperatures in the range 125-150C. Thin NiO films were…