Related papers: Mixed Convection From an Isothermal Rough Plate
We study turbulent Rayleigh-B\'enard convection over four decades of Rayleigh numbers 4E8 < Ra < 2E12, while harmonically modulating the temperatures of the plates of our cylindrical cell. We probe the flow by temperature sensors placed in…
The heat transfer behavior of convection-driven dynamos in a rotating plane layer between two parallel plates, heated from below and cooled from the top, is investigated. At a fixed rotation rate (Ekman Number, $E=10^{-6}$) and fluid…
We investigate the two-dimensional transport of heat through viscous flow between two parallel rough interfaces with a given fractal geometry. The flow and heat transport equations are solved through direct numerical simulations, and for…
Additive manufacturing creates surfaces with random roughness, impacting heat transfer and pressure loss differently than traditional sand-grain roughness. We conducted high-fidelity heat transfer simulations over three-dimensional additive…
In the above paper the author treats the boundary layer flow along a vertical flat plate, immersed in a Darcy Brinkman Forchheimer porous medium. The porosity and the permeability of the porous medium are variable across the boundary layer.…
Convection of an internally heated fluid, confined between top and bottom plates of equal temperature, is studied by direct numerical simulation in two and three dimensions. The unstably stratified upper region drives convection that…
This paper studies the effects of mixed convection fluid motion and heat transmission of Al2O3-Water nanofluid in a square enclosure including two heated obstacles, with temperature and nanoparticle concentration being determined by the…
The problem of forced convection along an isothermal moving plate is a classical problem of fluid mechanics that has been solved for the first time in 1961 by Sakiadis (1961). It appears that the first work concerning mixed convection along…
We present experimental data and their theoretical interpretation for the decay rates of temperature fluctuations in a thin layer of a fluid heated from below and confined between parallel horizontal plates. The measurements were made with…
The double diffusive convection between two parallel plates is numerically studied for a series of parameters. The flow is driven by the salinity difference and stabilized by the thermal field. Our simulations are directly compared to…
In situ thermal transport measurement of flowing fluid could be useful for the characterization and diagnosis of practical thermal systems such as fluid heat exchangers and thermal energy storage systems. Despite abundant reports on the…
We present experimental heat transport measurements of turbulent Rayleigh-B\'{e}nard convection with rotation about a vertical axis. The fluid, water with Prandtl number ($\sigma$) about 6, was confined in a cell which had a square cross…
Models of astrophysical convection, such as mixing length theory, typically assume that the heat transport is independent of microphysical diffusivities. Such 'diffusion-free' behaviour is, however, not observed in numerical simulations…
The vertical structure of stationary thin accretion discs is calculated from the energy balance equation with heat generation due to microscopic ion viscosity {\eta} and electron heat conductivity {\kappa}, both depending on temperature. In…
Accurate characterization of heat transport across solid-liquid interfaces is essential for thermal management in micro and nanoscale systems. Yet existing techniques often require prior knowledge of liquid properties, which complicates the…
Here we summarize the results from our direct numerical simulations (DNS) and experimental measurements on rotating Rayleigh-B\'enard (RB) convection. Our experiments and simulations are performed in cylindrical samples with an aspect ratio…
We explore the strengths and limitations of using a standard Michelson interferometer to sample line-of-sight-averaged temperature in water via two experimental setups: slow-varying temperature in static fluid and fast temperature…
We report heat transfer and temperature profile measurements in laboratory experiments of rapidly rotating convection in water under intense thermal forcing (Rayleigh number $Ra$ as high as $\sim 10^{13}$) and unprecedentedly strong…
The wetting of solid surfaces by fluids is a problem of great practical importance that has been extensively studied over the years. Most often, the experimental work has involved measurements of the contact angle made by a liquid on the…
We conducted direct numerical simulations (DNSs) of turbulent flow over three-dimensional sinusoidal roughness in a channel. A passive scalar is present in the flow with Prandtl number $Pr=0.7$, to study heat transfer by forced convection…