Related papers: A Broadband Conversion Loss Measurement Technique …
Terahertz microscopy has attracted attention owing to distinctive characteristics of the THz frequency region, particularly non-ionizing photon energy, spectral fingerprint, and transparency to most nonpolar materials. Nevertheless, the…
Terahertz imaging holds great potential for non-destructive material inspection, but practical implementation has been limited by resolution constraints. In this study, we present a single-pixel THz imaging system based on a confocal…
In this article, a time-domain calibration procedure is proposed for pulsed Terahertz Integrated Circuits (TIC) used in on-chip applications, where the conventional calibration methods are not applicable. The proposed post-detection method…
Terahertz (THz) technology, a cornerstone of next-generation high-speed communication and sensing, has long been hindered by impedance mismatch challenges that limit device performance and applicability. These challenges become particularly…
Wireless communications and sensing at terahertz (THz) band are increasingly investigated as promising short-range technologies because of the availability of high operational bandwidth at THz. In order to address the extremely high…
Terahertz (THz) communications are regarded as a pillar technology for the sixth generation (6G) wireless systems, by offering multi-ten-GHz bandwidth. To overcome the short transmission distance and huge propagation loss, ultra-massive…
Modern communication and sensing technologies rely on connecting the optical domain with the microwave domain. Terahertz technologies, spanning increased frequencies from 100 GHz to 10 THz, are critical for providing larger bandwidths and…
High hardware cost and high power consumption of massive multiple-input and multiple output (MIMO) are two challenges for the future wireless communications including beyond fifth generation (B5G) and sixth generation (6G). Adopting the…
This paper investigates experimental means of measuring the transmission matrix (TM) of a highly scattering medium, with the simplest optical setup. Spatial light modulation is performed by a digital micromirror device (DMD), allowing high…
Continuous Wave (CW) Terahertz spectroscopy enabled by photomixing is a promising high precision spectroscopic tool for the examination of a wide variety of samples including biological, chemical, and solid state. However, often it would be…
This paper reports on 3D-printed dielectric image lines for low-loss subTHz applications between 140 and 220 GHz. In contrast to conventional dielectric waveguides, a conductive copper substrate is used to achieve robust routing and…
An extended aperture has the potential to greatly improve ultrasound imaging performance. This work extends the effective aperture size by coherently compounding the received radio frequency data from multiple transducers. A framework is…
The Lambda-doublet transitions in CH at 3.3 and 0.7 GHz are unusually sensitive to variations in the fine-structure constant and the electron-to-proton mass ratio. We describe methods used to measure the frequencies of these transitions…
An improved phase retrieval method based Hilbert transform is introduced to quantitatively calculate the phase distribution from distorted fringe pattern. Also phase measurement deflectomety are widely used in specular type samples. The…
We demonstrate a distortion-free terahertz frequency stabilization technique using a "synthetic FM triplet" to overcome modulation sideband interference associated with high-density spectral lines in molecular clocks. By applying this…
The scarcity of spectrum resources in current wireless communication systems has sparked enormous research interest in the terahertz (THz) frequency band. This band is characterized by fundamentally different propagation properties…
Using tools from stochastic geometry, this paper develops a tractable framework to analyze the performance of a mobile user in a two-tier wireless network operating on sub-6GHz and terahertz (THz) transmission frequencies. Specifically,…
High absorption in a wide frequency band has attracted considerable interest since their potential applications in frequency spectrum imaging systems and anti-radar cloaking. In this paper, a polarization-independent, ultra-broadband and…
Laser self-mixing is in principle a simple and robust general purpose interferometric method, with the additional expressivity which results from nonlinearity. However, it is rather sensitive to unwanted changes in target reflectivity,…
The utilization of millimeter wave frequency bands is expected to become prevalent in the following communication systems. However, generating and transmitting communication signals over these frequencies is not as straightforward as in…