Related papers: Uncertainty Quantification in Computational Fluid …
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…
Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…
CFD is widely used in physical system design and optimization, where it is used to predict engineering quantities of interest, such as the lift on a plane wing or the drag on a motor vehicle. However, many systems of interest are…
Reynolds Averaged Navier Stokes (RANS) modelling is notorious for introducing the model-form uncertainty due to the Boussinesq turbulent viscosity hypothesis. Recently, the eigenspace perturbation method (EPM) has been developed to estimate…
In this report we briefly summarize the set-up and results for direct numerical simulations (DNS) of turbulent channel flows with riblets. The DNS are carried out with OpenFOAM which allows the use of an unstructured mesh. The present…
Computational fluid dynamics (CFD)-driven machine learning frameworks based on symbolic regression offer a promising pathway for turbulence model discovery, but are often hindered by numerical instability, residual stagnation, and…
We investigate the large-scale influence of numerical noises as tiny artificial stochastic disturbances on a sustained turbulence. Using the two-dimensional (2D) turbulent Rayleigh-B\'enard (RB) convection as an example, we numerically…
This paper proposes a phenomenological Reynolds Averaged Navier-Stokes (RANS) calculation model based on physical constraints. In this model part of the source terms in the e equation was replaced with the deep learning model, using the…
In computational fluid dynamics, there is an inevitable trade off between accuracy and computational cost. In this work, a novel multi-fidelity deep generative model is introduced for the surrogate modeling of high-fidelity turbulent flow…
Extending gradient-type turbulence closures to turbulent premixed flames is challenging due to the significant influence of combustion heat release. We incorporate a deep neural network (DNN) into Reynolds-averaged Navier--Stokes (RANS)…
The objective of this work is to assess the impact of parameter uncertainty on hypersonic aerothermal surface heating predictions in Reynolds-Averaged Navier-Stokes (RANS) simulations using non-intrusive uncertainty quantification (UQ)…
The present study represents a data-driven turbulent model with Galilean invariance preservation based on machine learning algorithm. The fully connected neural network (FCNN) and tensor basis neural network (TBNN) [Ling et al. (2016)] are…
Numerical simulations of turbulent fluids are paramount to real-life applications, from predicting and modeling flows to diagnostic purposes in engineering. However, they are also computationally challenging due to their intrinsically…
The Reynolds-averaged Navier-Stokes (RANS) equations provide a computationally efficient method for solving fluid flow problems in engineering applications. However, the use of closure models to represent turbulence effects can reduce their…
Reynolds-averaged Navier-Stokes (RANS) equations are presently one of the most popular models for simulating turbulence. Performing RANS simulation requires additional modeling for the anisotropic Reynolds stress tensor, but traditional…
Data-driven approaches offer novel opportunities for improving the performance of turbulent flow simulations, which are critical to wide-ranging applications from wind farms and aerodynamic designs to weather and climate forecasting. While…
Computational fluid dynamics (CFD) is a specialised branch of fluid mechanics that utilises numerical methods and algorithms to solve and analyze fluid-flow problems. One promising avenue to enhance CFD is the use of quantum computing,…
Computational Fluid Dynamics (CFD) is central to science and engineering, but faces severe scalability challenges, especially in high-dimensional, multiscale, and turbulent regimes. Traditional numerical methods often become prohibitively…
Two-way coupled DNS simulation of particle-laden turbulent Couette-flow [1], in the volume fraction regime $\phi>10^{-4}$, showed a discontinuous decrease of turbulence intensity beyond a critical volume fraction…
In this paper, a novel zonal machine learning (ML) approach for Reynolds-averaged Navier-Stokes (RANS) turbulence modelling based on the divide-and-conquer technique is introduced. This approach involves partitioning the flow domain into…