Related papers: Dynamic evolution of internal stress, grain growth…
The residual stress plays a vital role in determination of the device performance that uses thin films coating and thus the accurate determination of stress and its optimization with process parameters is an ongoing research work for many…
High-energy synchrotron x-rays are used to track grain rotations and the micromechanical evolution of a hexagonal Ti-7Al microstructure as it is cyclically loaded below its macroscopic yield stress. The evolution of the grains through 200…
The morphology of crystalline thin films evolving on flat rigid substrates by condensation of extra film atoms or by evaporation of their own atoms in the surrounding vapor is studied in the framework of the theory of Stress Driven…
In the presented research, the intergranular elastic interaction and the second-order plastic incompatibility stress in textured ferritic and austenitic steels were investigated by means of diffraction. The lattice strains were measured…
We report the reduction in residual stress of AlN thin films and also the crystal structure, surface morphology and nanomechanical properties of magnetron sputtered as a function of substrate temperature (Ts, 35 - 600 ?C). The residual…
Grain growth fundamentally shapes the microstructure of crystalline materials upon annealing, affecting their overall mechanical and functional properties. Recently, it has been rationalized that grain growth in polycrystals does not result…
The purpose of the present article is to make a model using analytical equations, based on elasticity theory of continuous media for small deformations, with the aim of completely characterizing the material in their mechanical properties…
During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…
It is demonstrated here that growth stress has a substantial effect on the dielectric constant of zirconia thin films. The correct combination of parameters - phase, texture and stress - is shown to yield films with high dielectric constant…
Specific heat of polycrystalline BaTiO3 thin films on the fused quartz substrate was measured by ac-hot probe method. Phase transition temperature, excess entropy and spontaneous polarization were determined as a function of film thickness…
Reactive dual ion beam sputter deposition of AlN thin films was carried out for the analysis of surface growth characteristics by Atomic Force Microscopy. The variation of roughness as a function of deposition time was analysed by Dynamic…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
The film thickness dependence of crystal growth is investigated for isotactic polystyrene (it-PS) in thin films, the thickness of which is from 20nm down to 4nm. The single crystals of it-PS grown at 180 in the ultrathin films show the…
Despite the large number of experiments demonstrating that grains in a metallic material can grow at room temperature due to applied mechanical load, the mechanisms and the driving forces responsible for mechanically induced grain…
Conventional polycrystalline materials acquire high levels of intrinsic mechanical stress (ranging from MPa to a few GPa) during preparation and use, but this stress decays quickly (~minutes) to small residual values (~kPa) under standard…
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…
We investigate the stress-driven morphological instability of epitaxially growing multilayer films, which are coherent and dislocation-free. We construct a direct elastic analysis, from which we determine the elastic state of the system…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…