Related papers: Unexpected Field Evaporation Sequence in $\gamma$-…
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 {\mu}g/cm 2…
In our previous publication, we discussed the optical properties of multi-layered nanocomposite samples consisting of 300 pairs of an AlOx layer and a Cu layer produced from sputtering atomic layer augmented deposition (SALAD). These…
The compositional diffusional-trajectories for a phase separation of gamma(f.c.c.)/gamma-prime(L12) phases are studied in a quaternary Ni-10Al-8.5Cr-2Re alloy, aged at 700 deg.C for 0 to 1024 h, utilizing atom-probe tomography (APT). As the…
Even though the phenomenon of evaporation is omnipresent and has immense scientific and technological importance, the research effort to unveil its fundamentals remains inadequately low. As one particular consequence, the textbooks and…
The first part of this article centers on the fact that key features of the dynamical response of weakly-correlated materials (the alkalis, Al), have been found experimentally to differ qualitatively from simple-model behavior. In the…
The extreme back-angle evaporation spectra of alpha, lithium, beryllium, boron and carbon from different compound nuclei near A=100 (EX=76-210 MeV) have been compared with the predictions of standard statistical model codes such as…
Silicon dioxide is a suitable material to encapsulate proteins at room temperature so that they can be analysed at the atomic level using laser-assisted atom probe tomography (La-APT). To achieve this goal, in this study we show that UV and…
Due to their remarkable mechanical and chemical properties, Ti-Al based materials are attracting considerable interest in numerous fields of engineering, such as automotive, aerospace, and defense. With their low density, high strength, and…
We discuss the possibility of non-exponential tunneling ionization of atoms irradiated by intense laser field. This effect can occur at times, which are greater than the lifetime of a system under consideration. The mechanism for…
The high strength of structural aluminium alloys depends strongly on the controlled precipitation of specific intermetallic phases, whose identity and crystal structure can be difficult to predict. Here, we investigate the Al-Pt system,…
Artifacts in the collective desorption map of the detector hits impede a truthful reconstruction, including enhanced "zone lines" with high atomic impact intensity. Since APT is destructive, simulation is the only approach to explain the…
Using the full potential linearized augmented plane wave (FLAPW) method, we have explored the magnetic properties of one dimensional (1D) Ti atomic chain. Astonishingly, we for the first time observed that the 1D Ti atomic chain has…
Previously reported crystalline structures obtained by an iterative phase retrieval reconstruction of their diffraction patterns seem to be free from displaying any irregularities or defects in the lattice, which appears to be unrealistic.…
We observe the spontaneous evaporation of atoms confined in a bubble-like rf-dressed trap (Zobay and Garraway, 2001). The atoms are confined in a quadrupole magnetic trap and are dressed by a linearly polarized rf field. The evaporation is…
Atom probe tomography data is composed of a list of coordinates of the reconstructed atoms in the probed volume. The elemental identity of each atom is derived from time-of-flight mass spectrometry, with no local energetic or chemical…
Atom probe tomography (APT) enables near atomic scale three dimensional elemental mapping through the controlled field evaporation of surface atoms triggered by the combined application of a DC voltage and either voltage or laser pulses. As…
Atom probe tomography (APT) is often quoted to provide "atomic-scale" analysis of materials in three dimensions. Despite efforts to quantify APT's spatial resolution, misunderstanding remain regarding its true spatial performance. If the…
Semi-empirical interatomic potentials have been developed for Al, alpha-Ti, and gamma-TiAl within the embedded atomic method (EAM) by fitting to a large database of experimental as well as ab-initio data. The ab-initio calculations were…
Site-specific atom probe tomography (APT) from aluminum alloys has been limited by sample preparation issues. Indeed, Ga, which is conventionally used in focused-ion beam (FIB) preparations, has a high affinity for Al grain boundaries and…
A numerical model is proposed to simulate the adhesion, compression, and subsequent detachment of a micro-liter droplet from a superhydrophobic surface composed of chemically homogeneous pillars arranged in a periodic fashion, replicating a…