Related papers: Integrated electro-optically tunable narrow-linewi…
We present a solid-state laser system that generates over 200 mW of continuous-wave, narrowband light, tunable from 316.3 nm - 317.7 nm and 318.0 nm - 319.3 nm. The laser is based on commercially available fiber amplifiers and optical…
Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast…
Wavelength widely tunable infrared fiber lasers that simultaneously deliver high pulse energies with narrow linewidths are critical for applications ranging from spectroscopy to nonlinear optics, yet achieving this combination has remained…
The erbium-doped Lithium niobate on insulator (Er:LNOI) platform has great promise in the application of telecommunication, microwave photonics, and quantum photonics due to its excellent electro-optic, piezo-electric, nonlinear nature as…
Thin-film lithium niobate (TFLN) electro-optic modulators are attractive for high-speed optical interconnects, but scalable transmitter architectures require not only high modulation bandwidth but also multi-channel optical power…
We demonstrate a C-band wavelength-tunable microlaser with an Er3+ doped high quality (~1.02x10^6) lithium niobate microdisk resonator. With a 976 nm continuous-wave pump laser, lasing action can be observed at a pump power threshold as low…
We report on the writing of chirped volume Bragg gratings using 400 nm femtosecond pulses and the phase-mask inscription technique in the pure silica inner cladding of the gain fiber. The usefulness of such fiber component is demonstrated…
An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG…
Tunable lasers are essential for optical communication, spectroscopy, and precision sensing, where flexible and fast control of the laser wavelength is needed. However, conventional tunable laser systems often rely on mechanical actuation,…
We report on two edge-coupling and power splitting devices for hybrid integration of III-V lasers with sub-micrometric silicon-on-insulator (SOI) waveguides. The proposed devices relax the horizontal alignment tolerances required to achieve…
The development of integrated semiconductor lasers has miniaturized traditional bulky laser systems, enabling a wide range of photonic applications. A progression from pure III-V based lasers to III-V/external cavity structures has…
A watt-level ultrahigh optical signal-to-noise ratio (OSNR) single-longitudinal-mode (SLM) tunable Brillouin fiber laser (BFL) has been demonstrated.By optimizing the length of the single mode fiber (SMF) cavity at 11m and its output ratio…
We demonstrate an external cavity laser formed by combining a silicon nitride photonic integrated circuit with a reflective semiconductor optical amplifier. The laser uses an alignment tolerant edge coupler formed by a multi-mode waveguide…
We present a tunable, continuous-wave (CW) laser system emitting at 213 nm, based on the frequency quadrupling of a single Ti:sapph laser. The setup features two sequential, cavity-enhanced second-harmonic generation (SHG) stages. The first…
We present an integrated hybrid semiconductor-dielectric (InP-Si$_3$N$_4$) waveguide laser that generates frequency combs at a wavelength around 1.5 $\mu$m with a record-low intrinsic optical linewidth of 34 kHz. This is achieved by…
Silicon nitride (Si3N4), as a complementary metal-oxide-semiconductor (CMOS) material, finds wide use in modern integrated circuit (IC) technology. The past decade has witnessed tremendous development of Si3N4 in photonic areas, with…
Quantum cascade lasers (QCLs) are semiconductor-heterostructure devices known for their emission in the mid-infrared and THz spectral regions. Due to their operating regime, their intrinsic linewidth is significantly narrower compared to…
Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a…
Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…
Photonic-based low-phase-noise microwave generation with real-time frequency tuning is crucial for a broad spectrum of subjects, including next-generation wireless communications, radar, metrology, and modern instrumentation. Here, for the…