Related papers: RFSoC-based front-end electronics for pulse detect…
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally…
Radio frequency (RF) biosensors, in particular those based on inter-digitated capacitors (IDCs), are pivotal in areas like biomedical diagnosis, remote sensing, and wireless communication. Despite their advantages of low cost and easy…
We have developed two radiation-hard ASICs for optical data transmission in the ATLAS pixel detector at the LHC at CERN: a driver chip for a Vertical Cavity Surface Emitting Laser (VCSEL) diode for 80 Mbit/s data transmission from the…
This study presents a novel field-programmable gate array (FPGA)-based Time-to-Digital Converter (TDC) design suitable for high timing resolution applications, utilizing two new techniques. First, a cross-detection (CD) method is introduced…
A novel photonics-based RF reception approach is proposed as a competitive solution to meet the current challenges of photonic-based approaches and to realize high performances at the same time. The proposed approach adopts the…
Employing low-resolution analog-to-digital converters (ADCs) for millimeter wave receivers with large antenna arrays provides opportunity to efficiently reduce power consumption of the receiver. Reducing ADC resolution, however, results in…
Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio…
Rydberg atoms have shown significant promise as the basis for highly sensitive detectors of continuous radio-frequency (RF) E-fields. Here, we study their time-dependent response to pulse-modulated RF E-fields at 19.4 GHz using a cesium…
The use of low-resolution analog-to-digital converters (ADCs) can significantly reduce power consumption and hardware cost. However, their resulting severe nonlinear distortion makes reliable data transmission challenging. For orthogonal…
Low-resolution analog-to-digital converters (ADCs) are promising for reducing energy consumption and costs of multiuser multiple-input multiple-output (MIMO) systems with many antennas. We propose low-resolution multiuser MIMO receivers…
This work presents the 8-channel FastIC+, a low-power consumption and highly configurable multi-channel front-end ASIC with internal digitization, for the readout of photo-sensors with picosecond time resolution and intrinsic gain. This…
We have developed two radiation-hard ASICs for optical data transmission in the ATLAS pixel detector at the LHC at CERN: a driver chip for a Vertical Cavity Surface Emitting Laser (VCSEL) diode for 80 Mbit/s data transmission from the…
Analog signal processing (ASP) is presented as a systematic approach to address future challenges in high speed and high frequency microwave applications. The general concept of ASP is explained with the help of examples emphasizing basic…
Resistance thermometry provides a time-tested method for taking temperature measurements. However, fundamental limits to resistance-based approaches has produced considerable interest in developing photonic temperature sensors to leverage…
Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detection technology that can, in principle, provide significantly greater responsivity and improved noise performance than traditional charge coupled device (CCD)…
We demonstrate a hybrid distributed fiber sensing system for multi-parameter detection. The integration of phase-sensitive optical time domain reflectometry ({\Phi}-OTDR) and Brillouin optical time domain reflectometry (B-OTDR) enables…
We have developed a digital fast Fourier transform (FFT) spectrometer made of an analog-to-digital converter (ADC) and a field-programmable gate array (FPGA). The base instrument has independent ADC and FPGA modules, which allow us to…
A new Digital Pulse Processing (DPP) module has been developed, based on a domino ring sampler version 4 chip (DRS4), with good time resolution for LaBr3 detectors, and different digital timing analysis methods for processing the raw…
In recent years, high speed and high resolution analog-to-digital converter (ADC) is widely employed in many physical experiments, especially in high precision time and charge measurement. The rapid increasing amount of digitized data…
In the last decade, quantum computing has grown from novel physics experiments with a few qubits to commercial systems with hundreds of qubits. As quantum computers continue to grow in qubit count, the classical control systems must scale…