Related papers: Coloured Digital Terahertz Holography Within 1.39-…
Terahertz (THz) technologies, generally defined as operating in the 0.1-10THz range, bridge the gap between electronic and photonic devices. Because THz radiation passes readily through materials such as plastics, paper and cloth it can be…
We present a temporally-multiplexed dual-colour terahertz (THz) imaging technique using THz-to-optical conversion in atomic vapour. By rapidly alternating the pump laser frequency, we sequentially excite two atomic states, each absorbing a…
It is reported that terahertz radiation from 0.69 THz to 2.54 THz has been sensitively detected in a device consisting of bundles of metallic carbon nanotubes, quasi-optically coupled through a lithographically fabricated antenna, and a…
Imaging applications in the terahertz (THz) frequency range are severely restricted by diffraction. Near-field scanning probe microscopy is commonly employed to enable mapping of the THz electromagnetic fields with sub-wavelength spatial…
Recently, digital holographic imaging techniques (including methods with heterodyne detection) have found increased attention in the terahertz (THz) frequency range. However, holographic techniques rely on the use of a reference beam in…
We report a demonstration of laser Doppler holography at a sustained acquisition rate of 250 Hz on a 1 Megapixel complementary metal-oxide-semiconductor (CMOS) sensor array and image display at 10 Hz frame rate. The holograms are optically…
A transverse computer-generated hologram (CGH) diffracts and provides flexible control of incident light by steering it to any point in the projected image plane - i.e. CGHs are able to direct the light to where it is needed and away from…
Terahertz (THz) near-field imaging is a flourishing discipline [1], with applications from fundamental studies of beam propagation [2,3] to the characterisation of metameterials [4,5] and waveguides [6,7]. Beating the diffraction limit…
We present a single-shot detection method of terahertz-correlated second harmonic generation in plasma-based sources by directly mixing an optical probe into femtosecond laser-induced plasma filaments in air. The single-shot second harmonic…
Holography is an established technique for measuring the wavefront of optical signals through interferometric combination with a reference wave. Conventionally the integration time of a hologram is limited by the interferometer coherence…
The invisibility cloak has been a long-standing dream for many researchers over the decades. The introduction of transformational optics has revitalized this field by providing a general method to design material distributions to hide the…
Terahertz (THz) imaging has the ability to see through otherwise opaque materials. However, due to the long wavelengths of THz radiation ({\lambda}=300{\mu}m at 1THz), far-field THz imaging techniques are heavily outperformed by optical…
Dry and wet drawing materials were investigated by THz time-domain spectroscopy in transmission mode. Carbon-based and iron-gall inks have been studied, some prepared following ancient recipes and others using current synthetic materials; a…
Terahertz quantum cascade lasers (THz QCLs) are chip-scale semiconductor lasers operating in the frequency range between 1-6 THz, useful as compact sources for spectroscopy, communications, and non-destructive imaging and testing. Here, we…
High-power multi-color terahertz (THz) radiation exhibits extraordinary scientific application prospects at various scientific frontiers, for its capacity to deliver THz excitation at multiple frequencies simultaneously. However, the…
The Terahertz band, spanning from 0.1~THz to 10~THz, is envisioned as a key technology to realize ultra-high data rates in the 6G and beyond mobile communication systems, due to its abundant bandwidth resource. However, to realize THz…
Near-field imaging with terahertz (THz) waves is emerging as a powerful technique for fundamental research in photonics and across physical and life sciences. Spatial resolution beyond the diffraction limit can be achieved by collecting THz…
By a proper arrangement of a digital holography setup, that combines off-axis geometry with phase-shifting recording conditions, it is possible to reach the theoretical shot noise limit, in real-time experiments.We studied this limit, and…
Terahertz imaging holds great potential for non-destructive material inspection, but practical implementation has been limited by resolution constraints. In this study, we present a single-pixel THz imaging system based on a confocal…
Terahertz time-domain spectroscopy (THz-TDS) employs sub-picosecond pulses to probe dielectric properties of materials giving as a result a 3-dimensional hyperspectral data cube. The spatial resolution of THz images is primarily limited by…