Related papers: Grain-level effects on in-situ deformation-induced…
The induction hardening behavior of a new, hot-rolled 0.4 wt.% carbon steel with the two different starting microstructures of upper and lower bainite has been simulated using a Gleeble 3800. The effect of heating rate in the range 1 - 500…
The locally varying tetragonality in martensite grains of a high-carbon steel (1.2 mass percent C) was resolved by electron backscatter diffraction (EBSD) with a spatial resolution in the order of 100nm. Compared to spatially integrating…
Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into…
Titanium-based shape memory alloys, such as Ti2448, have attracted enormous attention owing to their unique thermomechanical properties and potential biomedical applications. In this study, we develop a polycrystalline phase field to…
Phase transition of iron, as a prototype of martensite phase transition under dynamic loadings, exhibits huge diverges in its TP among experiments with different pressure medium and loading rates, even in the same initial samples. Great…
Based on classical concept, solidification of alloys is a direct transition from liquid phase to solid phase, by which dendrites and dendritic segregation are produced. Through in-situ and real time morphology observation and XRD test…
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable…
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the…
During grain growth in multiphase system, a convincing understanding on how the evolution kinetics of an individual phase-grains relates to the growth rate of entire microstructure is yet to be achieved. Therefore, in this work, comfortably…
We study the impact of a projectile onto a bed of 3 mm grains immersed in an index-matched fluid. Specifically, we vary the amount of prestrain on the sample, strengthening the force chains within the system. We find this affects only the…
In this paper we introduce a 3D phenomenological model for shape memory behavior, accounting for: martensite reorientation, asymmetric response of the material to tension/compression, different kinetics between forward and reverse phase…
Two finite element level-set (FE-LS) formulations are compared for the modeling of grain growth of 316L stainless steel in terms of grain size, mean values and histograms. Two kinds of microstructures are considered, some are generated…
Thermomechanical Controlled Processing (TMCP) is widely used to control the microstructure and properties of linepipe or high strength low alloy steels (HSLA). These steels are often joined by welding and used in demanding environments such…
This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained…
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic…
Martensitic transformation in steels is responsible for their very high strength and has thus been studied for more than one century since the first works of Martens. However, there is not yet simple physical theory. A rigorous…
Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate,…
The electronic structure, magnetism and phase stability of Pt2-xMn1+xGa(x=0, 0.25, 0.5, 0.75, 1) alloys are studied by first-principle calculations. The calculations reveal that a potential magnetic martensitic transformation can be…
The study of defect phases is important for designing nanostructured metals and alloys. Grain boundaries (GBs) form one class of defects that directly influence materials properties, such as deformability and strength. At the same time,…
Materials which can undergo slow diffusive transformations as well as fast displacive transformations are studied using the phase-field method. The model captures the essential features of the time-temperature-transformation (TTT) diagrams,…