Related papers: Microstructure evolution and characteristics of la…
Equiatomic TaNbHfZr refractory high-entropy alloys (HEAs) were synthesized by arc-melting. The HEAs were annealed at 1800{\deg}C for different times, at maximum up to 8 days. Their on average body-centered cubic (bcc), solid-solution…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
In this paper, to improve wear resistance of components such as screws under severe friction-wear, Fe-Cr-C-Mo-V-Ti-N hardfacing coatings were further developed. The hardfacing coatings were acquired by shielded manual arc welding (SMAW)…
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand…
New approaches for the design of alloy systems with multiprincipal elements is recently researched in refractory materials field. However, most research aimed at arc melting process with weakness of coarsening of grains and inhomogeneous…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite…
Refractory high entropy alloys (R-HEAs) are having properties and uses as high strength and high hardness materials for ambient and high temperature, aerospace and nuclear radiation tolerance applications, orthopedic applications etc. The…
Refractory high entropy alloys (RHEA) have been proven to have excellent mechanical properties with a potential use as protective thin films. However, the combination of high hardness with low friction and wear is a major challenge in the…
In the present investigation, a strongly bonded strip of an aluminium-magnesium based alloy AA5086 is successfully produced through accumulative roll bonding (ARB). A maximum of up to eight passes has been used for the purpose.…
The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by…
This study investigates the size-dependent mechanical behavior of the HfNbTaTiZr refractory high-entropy alloy (RHEA) under uniaxial tension, with a focus on the effects of random solid-solution (RSS) and chemical short-range order (CSRO).…
Two new refractory amorphous high-entropy alloys (RAHEAs) within the W--Ta--Cr--V and W--Ta--Cr--V--Hf systems were herein synthesized using magnetron-sputtering and tested under high-temperature annealing and displacing irradiation using…
We investigated the impact of annealing on the structural characteristics and superconducting critical temperature ($T_\mathrm{c}$) of the eutectic high-entropy alloy (HEA) superconductor NbScTiZr. The HEA manifests an eutectic…
This study explores Ti-containing complex concentrated alloys (CCAs) within the AlMoNbTiZr system, focusing on compositions located in regions of the Bo-Md diagram characterized by low bond order (Bo) and d-orbital energy level (Md). Four…
Energy efficiency is motivating the search for new high-temperature metals. Some new body-centered-cubic random multicomponent "high entropy alloys (HEAs)" based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
We demonstrate the development of a series of refractory high-entropy alloys containing aluminum AlRHEAs in the ordered BCC-B2 phase by varying the aluminum content within 10 to 25 atomic percent, with the goal of high strength and good…
In traditional body-centered cubic (bcc) metals, the core properties of screw dislocations play a critical role in plastic deformation at low temperatures. Recently, much attention has been focused on refractory high-entropy alloys (RHEAs),…
To assess long-term structural integrity under operational conditions in nuclear reactors, SS 316LN with varying nitrogen content is subjected to thermal aging for 20000 hours at 650{\deg}C. While the annealing twins and heterogeneous grain…
The mechanical performance and microstructures of a CoCrNi medium-entropy alloy (MEA) and NCoCrNi, alloyed with 0.5at% N, after high pressure torsion (HPT) and subsequent annealing treatments in a temperature range of 150-1000 {\deg}C were…