Related papers: Insight into the melt processed Polylimonene oxide…
Lead based relaxor ferroelectric thin films have been of technological importance due to excellent properties for several commercial applications. However subtleness and high cost of fabrication have plagued of these materials. In this work…
In this study, the effect of alumina and modified alumina nanoparticles in a PMMA/alumina nanocomposite was investigated. To attain this goal, the glass transition behavior of poly methyl methacrylate (PMMA), PMMA/alumina and…
In the search for alternative plasmonic materials SrMoO3 has recently been identified as possessing a number of desirable optical properties. Owing to the requirement for many plasmonic devices to operate at elevated temperatures however,…
Plasma electrolytic oxidation (PEO) is a process for obtaining oxide coatings on valve metals. Mostly PEO is done in an aqueous solution electrolyte which limits the size of treated parts due to the system heating up. In presented work an…
Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), scanning electron…
Fluorescent organic compounds are of significant importance to the development of low-cost opto-electronic devices. Blue fluorescence from aromatic or olefinic molecules and their derivatives is particularly important for display and…
In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of…
The pressure and temperature dependency of the electrical conductivity of poly(vinyl alcohol)/poly(vinyl pyrrolidone) (1/1, w/w) and poly(vinyl alcohol) and composites with dispersed nano-graphene platelets were studied. Above the critical…
Dielectric spectroscopy measurements over a broad range of temperature and pressure were carried out on poly(oxybutylene) (POB), a type-A polymer (dielectrically-active normal mode). There are three dynamic processes appearing at lower…
Recent experiments claimed that the enhancement of catalytic reaction rates occurs via the reduction of activation barriers driven by non-equilibrium (``hot'') electrons in plasmonic metal nanoparticles. These experiments place plasmonic…
Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), Thermo Mechanical…
Plasma electrolytic oxidation (PEO) is a surface processing for oxide coatings formation with advanced properties. Mostly, PEO is performed in an aqueous solution electrolyte which limits the dimension of treated parts due to the system…
We compare chemical solution deposition (CSD), and pulsed-laser-deposition (PLD), specimens of the new room-temperature, single-phase, multiferroic magnetoelectric, [PbFe2/3W1/3O3]x[PbZr0.53Ti0.47O3]1-x (PZTFWx ~ 0.40<x<0.20) with…
Poly(ethylene terephthalate) (PET) is a semi--crystalline polymer that can be crystallized to different degrees heating from the amorphous state. Even when primary crystallization has been completed, secondary crystallization can take place…
We discuss the validity and the outcome of a scaling hypothesis proposed by us some years ago, according to which the influence of the density on the slowing down of flow and relaxation in glassforming liquids and polymers is described…
Under pressure, carbon monoxide (CO) transforms into a polymer that can be recovered to ambient conditions. While this transformation can occur without additional stimuli, experimental observations have shown that laser irradiation can…
One pot synthetic technique was used to synthesize mesoporous fullerene using highly ordered mesoporous template such as KIT6-150 and SBA-15-150. Highly ordered porous fullerene with cross linkage between the fullerene molecules was…
Low frequency dielectric measurements on plexiglass (PMMA) show that cooling and heating the sample at constant rate give an hysteretic dependence on temperature of the dielectric constant $\epsilon$. A temporary stop of cooling produces a…
In this paper, 6 different reduced graphene oxide (rGO) were prepared by a modified Hummers method and reduced by thermochemical methods. rGO materials were intentionally prepared to obtain different BET and thickness and oxygen content…
Vapor pressures were measured for the system chloroform/polyethylene oxide (peo, weight average molar mass = 1000 kg/mol) at 25 degrees centigrade as a function of the weight fraction w of the polymer by means of a combination of head space…