Related papers: Optical system for extremely large spectroscopic s…

This paper presents the CFH12K-VIRMOS survey: a deep B, V, R and I imaging survey in four fields totalling more than 17 deg^2, conducted with the 30x40 arcmin^2 field CFH-12K camera. The survey is intended to be a multi-purpose survey used…

As part of a study funded by NASA Headquarters, we are developing a Probe-class mission concept called the Cosmic Evolution Through UV Spectroscopy (CETUS). CETUS includes a 1.5-m aperture diameter telescope with a large field-of-view…

With the advent of microsphere assisted microscopy in 2011, this technique emerged as a simple and easy way to obtain optical super-resolution. Although the possible mechanisms of imaging by microspheres are debated in the literature, most…

We present a compact two-lens HDPE f/1.6 refractor design that is capable of supporting a 28-deg diffraction-limited field of view at 1-mm wavelengths and contrast it to a similar two-lens refractor using silicon lenses. We compare the…

We describe a new concept for a MEMS-based active spatial filter for astronomical spectroscopy. The goal of this device is to allow the use of a diffraction-limited spectrometer on a seeing limited observation at improved throughput over a…

Large multi-object spectroscopic surveys require automated algorithms to optimise their observing strategy. One of the most ambitious upcoming spectroscopic surveys is the 4MOST survey. The 4MOST survey facility is a fibre-fed spectroscopic…

Fluorescence Correlation Spectroscopy (FCS) yields measurement parameters (number of molecules, diffusion time) that characterize the concentration and kinetics of fluorescent molecules within a supposedly known observation volume. Absolute…

There are several high-performance adaptive optics systems that deliver diffraction-limited imaging on ground-based telescopes, which renewed the interest of single-mode fiber (SMF) spectroscopy for exoplanet characterization. However, the…

In this paper we present a novel telescope composed exclusively of thin, flat optical elements, each being a hot-pressed multi-layered structure combining the properties of a lens, its anti-reflection coating and frequency selection or…

The design of a CubeSat telescope for academic research purposes must balance complicated optical and structural designs with cost to maximize performance in extreme environments. Increasing the CubeSat size (eg. 6U to 12U) will increase…

The realization of X-ray telescopes with imaging capabilities in the hard (> 10 keV) X-ray band requires the adoption of optics with shallow (< 0.25 deg) grazing angles to enhance the reflectivity of reflective coatings. On the other hand,…

Euclid is a space telescope currently developed in the framework of the ESA Cosmic Vision 2015-2025 Program. It addresses fundamental cosmological questions related to dark matter and dark energy. The lens system of one of the two…

This study presents a comprehensive end-to-end simulation analysis of the optical imaging performance of the China Survey Space Telescope (CSST) under in-orbit conditions. An integrated system model incorporating five static and two dynamic…

This paper presents an integrated modeling software to analyze the PSF of wide-field telescopes affected by misalignments. Even relatively small misalignments in the optical system of a telescope can significantly deteriorate the image…

The Ultra-Fast Flash Observatory-Pathfinder (UFFO-P) is to be launched onboard Lomonosov spacecraft in November 2011. It is to measure early UV/Optical photons from Gamma Ray Bursts (GRBs). Slewing Mirror Telescope (SMT) is one of two…

The maintenance of primary mirror segment co-phasing is a critical aspect to the operation of segmented telescopes. However, speckle-based measurements of the phasing of the Keck primary have estimated semi-static surface aberrations of…

We present the design of the Fabry-Perot system of the Robert Stobie Spectrograph on the 10-meter class Southern African Large Telescope and its characterization as measured in the laboratory. This system provides spectroscopic imaging at…

Herein, we describe the design, implementation and operation principles of an astronomical camera system, based on a large-format CCD261-84 detector with an extremely thick 200 mkm substrate. The DINACON-V controller was used with the CCD…

We have developed a method to measure the mirror reflectivity of telescopes. While it is relatively easy to measure the local reflectivity of the mirror material, it is not so straightforward to measure the amount of light that it focuses…

The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field…